Dardik Multi-Purpose Clamp Small Straight 150mm Jaw Type Dardik 2 x 3 Teeth

The Dardik Multi-Purpose Clamp Small Straight 150mm Jaw Type Dardik 2 x 3 Teeth is a specialized cardiovascular and vascular surgical clamp designed for controlled manipulation, temporary occlusion, and positioning of appropriate vascular structures. Its compact 150mm overall length , straight configuration, and specialized Dardik 2 x 3 tooth pattern provide a practical combination of reach, control, and focused tissue engagement. The small configuration makes this Dardik clamp particularly useful when a compact vascular instrument is preferred. Smaller surgical fields and delicate vascular structures can require instruments that provide accurate jaw placement without excessive instrument bulk. The 150mm length allows the surgeon to maintain close control of the working end while keeping the handles conveniently positioned. The straight design provides a direct approach to the target vessel. This configuration can be advantageous when the surgical anatomy permits a relatively linear instrument trajectory. It can also simplify positioning when compared with a curved or angled clamp in operative fields where direct access is available. A key feature of this instrument is its Dardik 2 x 3 tooth jaw configuration . This specialized arrangement provides an interlocking tooth pattern intended to help secure the target structure when the clamp is applied correctly. The configuration consists of two teeth on one jaw and three corresponding teeth on the opposing jaw. Careful positioning and controlled pressure are essential when using a toothed vascular clamp. The Dardik Multi-Purpose Clamp may be incorporated into cardiovascular, vascular, thoracic, and cardiothoracic surgical instrument sets . Depending on the specific surgical technique and anatomical requirements, it may support vessel preparation, temporary vascular occlusion, vascular reconstruction, tissue manipulation, and other procedures requiring controlled clamping of suitable structures. The term multi-purpose reflects the clamp’s versatility within appropriate vascular surgical applications. It should not be interpreted as indicating suitability for every type of tissue or surgical procedure. Proper instrument selection should always consider vessel size, tissue characteristics, operative location, and the specific requirements of the procedure. The 150mm length offers a useful balance between maneuverability and operative reach. Its compact size can be especially helpful in procedures involving smaller vessels or relatively accessible operative sites. The straight profile also allows direct visualization and positioning of the working jaws when the anatomy permits. The instrument is typically manufactured from surgical-grade stainless steel , providing the strength and durability required for reusable professional surgical instrumentation. Stainless steel construction also offers corrosion resistance when the clamp is correctly cleaned, dried, sterilized, and maintained. Ring-style handles allow controlled manual operation, while the locking mechanism can maintain the selected jaw position during appropriate procedures. Before use, the instrument should be inspected to verify proper jaw alignment, intact Dardik teeth, smooth hinge movement, and secure locking action. After use, the clamp should be cleaned promptly to prevent blood and biological material from drying on the instrument. Particular attention should be given to the 2 x 3 Dardik teeth, jaw surfaces, hinge, and ratchet mechanism , as debris can collect in these areas. The instrument should then be thoroughly rinsed, dried, inspected, and sterilized using a validated process appropriate for reusable surgical instruments. Routine inspection should include checking the teeth for deformation, wear, or breakage and confirming that the jaws close evenly. The handles, hinge, and locking mechanism should also be evaluated for smooth operation. Any instrument showing damage or impaired performance should be removed from service and assessed by qualified surgical instrument maintenance personnel. Overall, the Dardik Multi-Purpose Clamp Small Straight 150mm provides a compact and precise solution for appropriate vascular clamping applications. Its straight profile, 150mm length, specialized 2 x 3 Dardik teeth, and durable stainless steel construction make it a useful component of cardiovascular and vascular surgical instrument sets. Key Features Specialized Dardik multi-purpose vascular clamp Small compact configuration 150mm overall length Straight working profile for direct vessel access Dardik 2 x 3 tooth configuration Designed for controlled vascular clamping Suitable for temporary vessel occlusion Useful for vascular manipulation and preparation Compact design supports precise operative handling Ring handles provide controlled manual operation Surgical-grade stainless steel construction Suitable for reusable professional surgical instrumentation Product Specifications Specification Details Product Name Dardik Multi-Purpose Clamp Instrument Type Cardiovascular / Vascular Clamp Size Small Overall Length 150mm Configuration Straight Jaw Type Dardik Tooth Pattern 2 x 3 Dardik Teeth Primary Function Vascular Clamping & Manipulation Surgical Specialty Cardiovascular, Vascular & Thoracic Surgery Application Vessel Control & Temporary Occlusion Handle Type Ring Handle Locking Mechanism Ratchet / Locking Mechanism Material Surgical-Grade Stainless Steel Operation Manual Reusable Yes, with appropriate reprocessing Sterilization Validated surgical instrument sterilization methods Intended Users Qualified Surgical Professionals FAQs 1. What is a Dardik Multi-Purpose Clamp used for? It is designed for controlled clamping, manipulation, and temporary occlusion of appropriate vascular structures during selected cardiovascular and vascular procedures. 2. What is the length of this Dardik Clamp? This small model has an overall length of 150mm , providing a compact profile for precise surgical handling. 3. What does 2 x 3 Dardik teeth mean? The 2 x 3 configuration indicates two teeth on one jaw and three corresponding teeth on the opposing jaw, creating a specialized interlocking gripping pattern. 4. What is the advantage of the straight configuration? The straight configuration provides a direct approach to the target vessel and can simplify jaw positioning when the anatomy allows a linear instrument trajectory. 5. Is this Dardik Clamp suitable for cardiovascular surgery? Yes. It is designed for appropriate cardiovascular and vascular applications requiring controlled vessel manipulation or temporary occlusion. 6. Why choose the small Dardik Clamp? The small configuration provides a compact working profile that can be useful when precise access and maneuverability are required around smaller or more accessible vascular structures. 7. What material is the Dardik Multi-Purpose Clamp made from? The instrument is specified as being manufactured from surgical-grade stainless steel , providing durability and corrosion resistance with proper maintenance.