Microsurg. Scis. Stl Swiss Perio 45°

The Microsurg. Scis. Stl Swiss Perio 45° is a specialized microsurgical scissors design intended for precise cutting, trimming, and soft-tissue dissection during periodontal and other delicate surgical procedures. Its 45° angled working end provides an ergonomic approach to the operative field, helping the clinician access areas that may be difficult to reach with conventional straight scissors. The angled configuration is particularly useful in periodontal microsurgery, where the surgical field can be narrow and precise tissue manipulation is essential. By positioning the cutting blades at approximately 45 degrees relative to the instrument shaft, the surgeon can approach tissue from an offset angle while maintaining a controlled hand position. This can improve maneuverability and visibility during delicate procedures. The Swiss Perio 45° Microsurgical Scissors are designed for fine surgical movements rather than heavy cutting. Their precision blades support controlled tissue trimming and dissection while allowing the operator to make small, deliberate cuts. The exact blade length, tip configuration, and cutting-edge profile should be verified against the supplier’s product specifications. These microsurgical scissors are particularly suitable for periodontal procedures where delicate soft-tissue handling is required. They may also be incorporated into mucogingival surgery sets, implant soft-tissue surgery kits, plastic and reconstructive surgery collections, and other specialty microsurgical instrument systems where angled access is beneficial. The “Stl” designation indicates stainless steel construction. High-quality surgical stainless steel is widely used for reusable microsurgical instruments because it provides mechanical strength, corrosion resistance, and durability when proper cleaning, drying, sterilization, and maintenance procedures are followed. The exact stainless steel grade and surface finish should be confirmed with the manufacturer or supplier. The 45° blade orientation is an important ergonomic feature. It allows the operator to maintain a relatively neutral hand position while directing the cutting edge toward the target tissue. This can be advantageous when working around gingival margins, periodontal structures, or other confined anatomical areas. Proper instrument technique remains essential to prevent excessive tissue manipulation. The fine working mechanism should be operated with controlled pressure. Microsurgical scissors are precision instruments and should not be used to cut wire, heavy sutures, bone, or other hard materials unless specifically designed for those applications. Using the scissors only for their intended purpose helps preserve the sharpness, alignment, and functional integrity of the blades. After use, the Microsurg. Scis. Stl Swiss Perio 45° should be processed according to the dental facility’s validated instrument-reprocessing protocol. Biological material should be removed promptly before drying. The scissors should be thoroughly cleaned, rinsed, dried, inspected, and sterilized using a validated method appropriate for stainless steel surgical instruments. Inspection should include the cutting edges, tips, pivot, handles, and 45° blade alignment. The blades should open and close smoothly and meet correctly along their cutting surfaces. Any evidence of corrosion, nicks, deformation, loose joints, misalignment, or reduced cutting performance should be evaluated before reuse. Proper storage is equally important for maintaining microsurgical scissors. The fine blades should be protected from contact with heavy or sharp instruments. Appropriate instrument trays, holders, and protective systems can reduce the risk of accidental blade damage during transportation, sterilization, and storage. With its 45° angled microsurgical design, stainless steel construction, fine cutting edges, and periodontal-oriented configuration , the Microsurg. Scis. Stl Swiss Perio 45° provides a precision solution for clinicians requiring controlled access and accurate cutting during delicate periodontal and microsurgical procedures. Key Features Swiss Perio 45° microsurgical scissors Stainless steel surgical construction 45° angled working-end configuration Designed for precision periodontal procedures Fine blades support controlled soft-tissue cutting Angled profile improves access to confined operative fields Suitable for delicate tissue trimming and dissection Supports accurate microsurgical manipulation Ergonomic design promotes controlled hand positioning Suitable for periodontal and specialty microsurgical sets Reusable when properly cleaned and sterilized Precision blades require careful handling and maintenance Product Specifications Specification Details Product Name Microsurg. Scis. Stl Swiss Perio 45° Instrument Type Microsurgical Scissors Design Swiss Perio Blade Angle 45° Material Stainless Steel Primary Function Tissue Cutting and Dissection Application Periodontal Microsurgery Working End Fine Angled Blades Specialty Periodontics / Microsurgery Handle Precision Surgical Handle Reusable Yes, when supplied as reusable Sterilization According to validated dental sterilization protocols Intended Users Qualified Dental Professionals FAQs 1. What are Swiss Perio 45° Microsurgical Scissors used for? They are designed for precise soft-tissue cutting, trimming, and dissection during periodontal microsurgery and other delicate surgical procedures. 2. What is the benefit of a 45° angled microsurgical scissors? The 45° angle provides an offset approach to the operative field, which can improve access and maneuverability around confined anatomical structures. 3. Are Swiss Perio 45° Scissors suitable for periodontal surgery? Yes. They are specifically suited to precision periodontal and microsurgical procedures where controlled soft-tissue cutting is required. 4. What does “Stl” mean in the product name? “Stl” indicates stainless steel construction, a commonly used material for durable reusable surgical instruments. 5. Are these microsurgical scissors reusable? Yes, when supplied as reusable instruments. They should be cleaned, inspected, sterilized, and maintained according to validated dental protocols. 6. How should Swiss Perio 45° Microsurgical Scissors be sterilized? They should be thoroughly cleaned and sterilized using a validated method appropriate for stainless steel surgical instruments and consistent with manufacturer recommendations. 7. Can these scissors cut sutures? They are primarily intended for delicate tissue cutting and dissection. Suture cutting should only be performed when appropriate for the specific scissors and suture material.