Minimally Invasive Contouring Instrument

The Minimally Invasive Contouring Instrument is a professional restorative dental instrument designed for precise carving and sculpting of composite during minimally invasive and microscopic dental procedures. Its two distinctly different working ends allow clinicians to perform both carving and sculpting with a single instrument. The instrument is part of a minimally invasive dental instrument range developed with exceptionally fine working ends. These fine working ends are designed to support clinicians when working under magnification, including magnifying glasses and dental microscopes. HuFriedyGroup states that the instruments can be used for minimally invasive and microscopic procedures at magnification levels of up to 25× . The PFIKOT1 Minimally Invasive Contouring Instrument was developed with Key Opinion Leader Prof. Dr. Peter Kotschy . Its specialized working-end configuration is intended to provide controlled access and detailed manipulation when working in small restorative areas. During composite restorative procedures, the instrument can assist with sculpting and contouring restorative material to develop appropriate anatomical form. The two working ends provide flexibility when switching between different contouring and carving requirements. The instrument can complement other minimally invasive restorative instruments, including micro excavators, minimally invasive carvers, burnishers, composite placement instruments, explorers, and finishing instruments. This makes it suitable for a coordinated minimally invasive restorative setup. The Minimally Invasive Contouring Instrument is particularly appropriate for professional applications in minimally invasive dentistry, microscopic dentistry, restorative dentistry, operative dentistry, composite dentistry, and aesthetic restorative procedures . For maintenance, HuFriedyGroup recommends gently wiping composite instrument ends with an alcohol-saturated swab or gauze immediately after use to minimize composite buildup. The instrument should then be cleaned and sterilized according to the applicable instructions for use. Exact technical specifications such as overall length, handle configuration, working-end dimensions, and finish should be verified against the specific product model before publishing fixed specifications. Key Features Minimally Invasive Contouring Instrument HuFriedyGroup model PFIKOT1 Two distinctly different working ends Designed for carving and sculpting Exceptionally fine working ends Suitable for minimally invasive dentistry Designed for microscopic dental procedures Suitable for magnification up to 25× Developed with Prof. Dr. Peter Kotschy Ideal for detailed composite contouring Professional restorative dental instrument Reusable when supplied as a reusable model Product Specifications Specification Details Product Type Minimally Invasive Contouring Instrument Model PFIKOT1 Working Ends 2 Different Working Ends Design Thin, Precision Working Ends Primary Use Carving & Sculpting Application Minimally Invasive & Microscopic Dentistry Magnification Up to 25× Specialty Restorative & Operative Dentistry Developer Prof. Dr. Peter Kotschy Sterilization According to manufacturer instructions Reusability Reusable Product Contents 1 × Minimally Invasive Contouring Instrument Product Contents 1 × Minimally Invasive Contouring Instrument PFIKOT1 Applications Minimally invasive dentistry Microscopic dentistry Composite sculpting Composite contouring Restorative material shaping Anatomical contour refinement Direct composite restorations Operative dentistry Restorative dentistry Aesthetic restorative procedures Magnification-assisted dental procedures Dental education and clinical training FAQs 1. What is a Minimally Invasive Contouring Instrument? It is a precision restorative instrument designed for detailed carving and sculpting during minimally invasive dental procedures. 2. What is the PFIKOT1? PFIKOT1 is the HuFriedyGroup product code for the Minimally Invasive Contouring Instrument. 3. How many working ends does it have? The instrument has two distinctly different working ends , allowing it to be used for both carving and sculpting. 4. Can it be used under a microscope? Yes. It is specifically designed for minimally invasive and microscopic dental procedures and can be used under magnification up to 25×. 5. Who developed the instrument? The minimally invasive instrument range was developed with Prof. Dr. Peter Kotschy . 6. Can it be used for composite? Yes. It is designed for carving and sculpting in restorative workflows and is suitable for detailed composite contouring. 7. How should composite buildup be removed? HuFriedyGroup recommends gently wiping the instrument ends with an alcohol-saturated swab or gauze immediately after use, followed by cleaning and sterilization according to the applicable instructions.