1/4″ VATS DeBakey Clamp 10 mm Shaft, 100 mm DeBakey 2×3 Jaws

The 1/4″ VATS DeBakey Clamp 10 mm Shaft, 100 mm DeBakey 2×3 Jaws is a specialized minimally invasive surgical instrument designed for Video-Assisted Thoracic Surgery (VATS) and other appropriate thoracoscopic procedures requiring controlled tissue manipulation. Its narrow 10 mm shaft provides access through compatible thoracoscopic ports, while the DeBakey 2×3 jaw configuration is designed to provide controlled engagement with suitable tissues within the operative field. The 10 mm shaft diameter is an important specification for minimally invasive surgical applications. It provides a defined instrument profile intended for use with appropriately sized thoracoscopic access systems. The shaft allows the working end to reach the operative site while the surgeon maintains control of the handle outside the body. Correct compatibility between the shaft diameter and access port is essential when selecting VATS instruments. This model incorporates a 100 mm DeBakey 2×3 jaw configuration . The 100 mm specification identifies the supplied working or jaw configuration, while the 2×3 DeBakey tooth pattern provides a specialized gripping arrangement for controlled tissue engagement. DeBakey-style jaws are commonly incorporated into surgical instruments intended for careful tissue manipulation, with the tooth arrangement providing defined contact points for suitable structures. The 2×3 configuration distinguishes this instrument from VATS clamps featuring other DeBakey tooth patterns. A multi-tooth arrangement can provide a broader series of engagement points along the working surface. The instrument should nevertheless be used with appropriate surgical technique and controlled pressure because the amount of force applied to tissue must be appropriate to the intended structure and procedure. The 1/4″ specification is retained as part of the supplied product identification and should be considered together with the 10 mm shaft and 100 mm DeBakey 2×3 jaw configuration. Accurate dimensional information is important when selecting instruments for minimally invasive surgical trays, where shaft diameter, working length, jaw geometry, and port compatibility must be considered together. This VATS DeBakey Clamp can be included in VATS instrument sets, thoracoscopic surgery trays, minimally invasive thoracic surgery collections, pulmonary surgery instrument systems, and cardiothoracic surgical instrument sets . It may be used for controlled manipulation of appropriate tissues during procedures performed through minimally invasive thoracic access. The specific clinical indication and method of use should always be determined by the operating surgeon according to patient anatomy and established surgical practice. The 100 mm working configuration provides useful reach within the thoracic operative field while maintaining a compact working profile. Combined with the 10 mm shaft, it provides the surgeon with a practical instrument for manipulating suitable structures through a compatible access port. The DeBakey 2×3 jaws provide controlled tissue engagement while allowing the operator to maintain precise positioning during minimally invasive maneuvers. For reusable configurations, appropriate processing is essential to preserve instrument performance and support safe clinical use. Following each procedure, the VATS DeBakey Clamp should be cleaned promptly according to the healthcare facility’s validated instrument-processing procedures. Particular attention should be paid to the narrow shaft, jaw surfaces, tooth pattern, and moving components where biological material may remain. After cleaning and decontamination, the clamp should be carefully inspected for proper jaw alignment, tooth integrity, shaft condition, and smooth mechanical operation. Sterilization should be performed using a validated method consistent with applicable manufacturer instructions and institutional protocols. Proper cleaning, inspection, sterilization, handling, and storage help maintain the instrument’s functional condition over repeated use. For hospitals, thoracic surgeons, minimally invasive surgery centers, operating-room professionals, and medical instrument suppliers, the 1/4″ VATS DeBakey Clamp with 10 mm Shaft, 100 mm DeBakey 2×3 Jaws provides a specialized solution for controlled thoracoscopic tissue manipulation. Its narrow shaft, defined working length, and DeBakey 2×3 jaw configuration make it a practical addition to professional VATS surgical instrument inventories. Key Features 1/4″ VATS DeBakey Clamp configuration 10 mm shaft diameter 100 mm DeBakey working or jaw configuration DeBakey 2×3 tooth pattern Designed for controlled tissue manipulation Suitable for video-assisted thoracic surgery Narrow shaft supports compatible minimally invasive access Multi-tooth jaw pattern provides defined tissue engagement Designed for precise positioning within the thoracic operative field Suitable for VATS and thoracoscopic surgical instrument sets Professional surgical construction Requires appropriate cleaning, inspection, and sterilization procedures Product Specifications Specification Details Product Name VATS DeBakey Clamp Product Type Thoracoscopic Surgical Clamp VATS Specification 1/4″ Shaft Diameter 10 mm Jaw / Working Length 100 mm Jaw Pattern DeBakey 2×3 Jaw Type DeBakey Instrument Design Minimally Invasive / VATS Primary Application Thoracic Surgery Intended Use Controlled Tissue Handling and Manipulation Access Compatible Thoracoscopic Port Construction Surgical Instrument Sterilization According to validated facility protocol and manufacturer guidance Intended Users Trained Surgical Professionals FAQs 1. What is a 1/4″ VATS DeBakey Clamp used for? The instrument is designed for controlled tissue manipulation during video-assisted thoracic surgery and other appropriate minimally invasive thoracic procedures. 2. What is the shaft diameter of this VATS DeBakey Clamp? This model features a 10 mm shaft diameter , intended for use with compatible thoracoscopic access systems. 3. What does 100 mm DeBakey 2×3 jaws mean? The 100 mm specification identifies the specified working or jaw configuration, while the 2×3 DeBakey pattern describes the arrangement of teeth on the gripping surface. 4. What are DeBakey 2×3 jaws? DeBakey 2×3 jaws feature a specialized multi-tooth configuration designed to provide controlled engagement with appropriate tissue during surgical manipulation. 5. Is this clamp suitable for VATS procedures? Yes. Its 10 mm shaft and DeBakey 2×3 jaw configuration are designed for appropriate VATS and thoracoscopic surgical applications. 6. How should this VATS DeBakey Clamp be maintained? The instrument should be cleaned and decontaminated promptly after use, paying particular attention to the shaft, jaw teeth, and moving mechanism. It should then be inspected and sterilized according to validated facility procedures. 7. What surgical sets can include this DeBakey Clamp? It can be included in VATS instrument sets, thoracoscopic surgery trays, minimally invasive thoracic surgery sets, pulmonary surgery collections, and cardiothoracic surgical instrument systems .