10 1/2″ Grant Abdominal Aorta Clamp

The 10 1/2″ Grant Abdominal Aorta Clamp is a specialized vascular surgical instrument designed for controlled occlusion and manipulation of the abdominal aorta and other appropriate major vascular structures during complex abdominal and cardiovascular procedures. Its extended 10 1/2-inch overall length provides useful operative reach, making it suitable for surgical environments where the target vessel may be located within a deep or restricted abdominal operative field. Abdominal aorta clamps are specialized instruments used when temporary vascular control is required during selected procedures involving the abdominal aorta. Depending on the surgical technique, an aortic clamp may assist with vascular isolation, repair, reconstruction, graft-related procedures, aneurysm surgery, or other operations requiring controlled occlusion of a major vessel. The exact clinical application, placement, and duration of clamping must always be determined by the operating surgeon according to the patient’s anatomy and the requirements of the procedure. The 10 1/2-inch overall length provides a balance between extended surgical reach and controlled instrument handling. Longer vascular clamps can be particularly useful when working in deep abdominal operative fields because they allow the working end to reach the target structure while keeping the surgeon’s hand and handle at a practical distance from the surgical site. This can support better instrument positioning and operative access. The Grant Abdominal Aorta Clamp is designed as a dedicated instrument for professional vascular surgery. Reliable mechanical performance is important when working with major vascular structures. The clamp should provide controlled opening and closing, appropriate alignment of the working components, and consistent mechanical action throughout the procedure. Because the supplied product title does not specify the jaw length, jaw angle, tooth configuration, opening capacity, or clamping force, these characteristics should be confirmed through the manufacturer’s technical specifications before clinical selection. The 10 1/2-inch length alone should not be interpreted as a specific vessel-diameter recommendation. The Grant Abdominal Aorta Clamp can be incorporated into abdominal vascular surgery sets, aortic surgery instrument trays, cardiovascular collections, and specialized vascular reconstruction systems. It can complement other instruments such as aortic forceps, vascular scissors, vessel dilators, vascular needle holders, graft-handling instruments, and additional aortic clamps. Professional vascular clamps are commonly manufactured from surgical-grade stainless steel or another suitable surgical instrument material. Stainless steel is widely used for reusable cardiovascular and vascular instruments because it offers strength, durability, corrosion resistance, and compatibility with appropriate cleaning and sterilization procedures. Exact material composition, finish, jaw design, and mechanical characteristics should be confirmed with the manufacturer or supplier. Proper instrument selection and handling are essential during major vascular procedures. Before use, the Grant Abdominal Aorta Clamp should be inspected for proper jaw alignment, smooth mechanical movement, structural integrity, corrosion, surface damage, and any signs of deformation. The instrument should be used only by appropriately trained healthcare professionals according to established surgical technique. Following a procedure, the clamp should be cleaned promptly according to the manufacturer’s validated surgical-instrument reprocessing instructions. Particular attention should be paid to the working jaws, hinge, shaft, and mechanical components so that biological material and cleaning residues are completely removed. After cleaning, the instrument should be thoroughly rinsed and dried before inspection. Any clamp showing damaged working surfaces, corrosion, deformation, or abnormal mechanical function should be removed from clinical service and evaluated by qualified personnel. If supplied as a reusable instrument, sterilization should be performed according to the manufacturer’s validated instructions and the healthcare facility’s approved sterilization protocol. Thorough cleaning before sterilization is essential for effective processing. After sterilization, the long clamp should be stored in a clean, dry environment that protects the instrument from impact, contamination, moisture, and unnecessary mechanical stress. The 10 1/2″ Grant Abdominal Aorta Clamp provides extended reach and controlled vascular access for professional abdominal, aortic, and vascular surgical procedures. Its dedicated configuration makes it a practical addition to surgical facilities requiring specialized instrumentation for temporary major-vessel occlusion and manipulation. Key Features Grant Abdominal Aorta Clamp configuration 10 1/2″ overall length Designed for controlled abdominal aortic occlusion Suitable for selected abdominal and vascular procedures Useful for aortic and cardiovascular surgical applications Extended length for deep operative fields Supports controlled manipulation of major vascular structures Precision-oriented mechanical design Durable surgical instrument construction Suitable for abdominal vascular surgery sets Designed for professional surgical use Suitable for appropriate cleaning and sterilization procedures Product Specifications Specification Details Product Name Grant Abdominal Aorta Clamp Instrument Type Abdominal Aorta / Vascular Clamp Overall Length 10 1/2″ Primary Function Controlled abdominal aortic occlusion Surgical Specialty Vascular, Cardiovascular, Abdominal Surgery Application Abdominal aorta and major-vessel procedures Design Grant Jaw Configuration Not specified in supplied product title Jaw Length Not specified Angulation Not specified Tooth Configuration Not specified Construction Surgical-grade instrument material Reusable Subject to manufacturer specifications Sterilization According to validated sterilization protocols Intended Use Professional surgical applications FAQs 1. What is the 10 1/2″ Grant Abdominal Aorta Clamp used for? It is designed for controlled temporary occlusion and manipulation of the abdominal aorta and other appropriate major vascular structures during selected abdominal and vascular surgical procedures. 2. What is the overall length of this Grant Aorta Clamp? The overall instrument length is 10 1/2 inches , providing extended reach for appropriate deep-field surgical applications. 3. What is an abdominal aorta clamp? An abdominal aorta clamp is a specialized vascular instrument used to provide temporary control of the abdominal aorta during selected procedures requiring controlled vascular occlusion. 4. Is this Grant clamp suitable for vascular surgery? Yes. It is designed for professional vascular and abdominal surgical applications involving controlled occlusion and manipulation of major vascular structures. 5. Why is this clamp 10 1/2 inches long? The extended length provides additional reach into deep abdominal operative fields while keeping the handle at a practical distance from the target vessel. 6. Does the product title specify the jaw dimensions? No. The supplied title identifies the instrument and overall length but does not specify jaw length, jaw angle, tooth configuration, or clamping force. These details should be confirmed from the manufacturer’s specifications. 7. What material is commonly used for an abdominal aorta clamp? Reusable vascular clamps are commonly manufactured from surgical-grade stainless steel or another suitable surgical instrument material. Exact material specifications should be confirmed with the manufacturer.