10″ Morris Long Ascending Aorta Clamp

The 10″ Morris Long Ascending Aorta Clamp is a specialized cardiovascular surgical instrument designed for controlled occlusion and manipulation of the ascending aorta during selected cardiac, aortic, and cardiothoracic procedures. Its Morris-style configuration combined with an extended 10-inch overall length provides useful surgical reach for operative fields where additional access is required around major vascular structures. Ascending aorta clamps are specialized instruments used when temporary vascular control of the ascending aorta is required during an appropriate surgical technique. Depending on the procedure, an aortic clamp may be incorporated into selected open-heart, cardiovascular, thoracic, or aortic operations involving vascular isolation, repair, reconstruction, or other forms of controlled vessel occlusion. The exact clinical application, positioning, pressure, and duration of clamping should always be determined by the operating surgeon according to patient anatomy and established surgical technique. The 10-inch overall length is a defining characteristic of the Morris Long Ascending Aorta Clamp. An extended vascular instrument can provide additional reach into the thoracic operative field while allowing the surgeon to maintain the handle at a practical distance from the immediate surgical site. This can be useful when access to the ascending aorta requires an instrument with greater length than a standard aortic clamp. The Morris Long configuration is intended to support controlled instrument positioning around major vascular structures. Proper mechanical operation is essential in cardiovascular surgery, where accurate working-end alignment and predictable clamp movement are important. Before clinical use, the instrument should be inspected to ensure that its components operate smoothly and remain free from visible damage or deformation. The supplied product title does not specify detailed jaw dimensions, jaw angulation, tooth configuration, or clamping force. These characteristics should be verified with the manufacturer’s technical documentation before clinical selection. The 10-inch overall length should not be interpreted by itself as an indication of suitability for a particular vessel diameter or procedure. The Morris Long Ascending Aorta Clamp can be incorporated into cardiac surgery instrument sets, cardiovascular trays, cardiothoracic surgical collections, and specialized aortic instrument systems. It can complement other instruments such as vascular forceps, aortic scissors, vessel dilators, graft-handling instruments, vascular needle holders, and additional cardiovascular clamps. Professional reusable vascular clamps are commonly manufactured from surgical-grade stainless steel or another suitable surgical instrument material. Stainless steel is widely used for cardiovascular instrumentation because it offers mechanical strength, durability, corrosion resistance, and compatibility with appropriate cleaning and sterilization procedures. Exact material composition, surface finish, jaw characteristics, and mechanical specifications should be confirmed with the manufacturer or supplier. Because the instrument is intended for use around major vascular structures, careful handling and inspection are essential. Before use, the clamp should be checked for proper jaw alignment, smooth opening and closing action, structural integrity, corrosion, surface damage, and other abnormalities. Any instrument with compromised mechanical performance should be removed from clinical service and assessed by qualified personnel. After use, the clamp should be cleaned promptly according to the manufacturer’s validated instrument-processing instructions. Particular attention should be given to the jaws, hinge, shaft, and other moving components to ensure thorough removal of biological material and cleaning residues. The instrument should then be rinsed and dried according to the established reprocessing procedure. Following cleaning, the Morris Long Ascending Aorta Clamp should undergo a complete inspection before sterilization. The working end should remain properly aligned and free from deformation or damage. The instrument should move smoothly and demonstrate appropriate mechanical function. If supplied as a reusable surgical instrument, sterilization should be performed according to the manufacturer’s validated instructions and the healthcare facility’s approved sterilization protocol. Thorough cleaning before sterilization is essential for effective instrument processing. After sterilization, the long clamp should be stored in a clean, dry environment that protects the working components from impact, contamination, moisture, and unnecessary mechanical stress. The 10″ Morris Long Ascending Aorta Clamp provides extended surgical reach and controlled aortic handling for professional cardiovascular and cardiothoracic procedures. Its dedicated long configuration makes it a practical addition to specialized instrument collections requiring reliable access and vascular occlusion capability around the ascending aorta. Key Features Morris Long Ascending Aorta Clamp design 10″ overall instrument length Extended configuration for increased surgical reach Designed for controlled ascending aortic occlusion Suitable for selected cardiovascular procedures Useful for open-heart and cardiothoracic surgery Supports controlled manipulation of major vascular structures Practical profile for deeper thoracic operative fields Precision-oriented mechanical construction Durable surgical instrument design Suitable for specialized cardiac instrument sets Designed for appropriate cleaning and sterilization procedures Product Specifications Specification Details Product Name Morris Long Ascending Aorta Clamp Instrument Type Ascending Aorta / Vascular Clamp Overall Length 10 inches Primary Function Controlled ascending aortic occlusion Surgical Specialty Cardiovascular, Cardiothoracic, Aortic Surgery Application Ascending aorta and major-vessel procedures Design Morris Long Jaw Configuration Not specified in supplied product title Jaw Length Not specified Angulation Not specified Tooth Configuration Not specified Clamping Force Not specified Construction Surgical-grade instrument material Reusable Subject to manufacturer specifications Sterilization According to validated sterilization protocols Intended Use Professional surgical applications FAQs 1. What is the 10″ Morris Long Ascending Aorta Clamp used for? It is designed for controlled temporary occlusion and manipulation of the ascending aorta during selected cardiovascular, cardiac, and cardiothoracic surgical procedures. 2. What is the overall length of this Morris clamp? The overall instrument length is 10 inches , providing extended reach for appropriate surgical applications. 3. What is an ascending aorta clamp? An ascending aorta clamp is a specialized cardiovascular instrument used to provide temporary control of the ascending aorta during selected procedures requiring controlled vascular occlusion. 4. What is the advantage of the Morris Long configuration? The extended configuration provides additional reach into the thoracic operative field and can facilitate instrument positioning when a longer vascular clamp is required. 5. Is this clamp suitable for cardiac surgery? Yes. It is intended as a specialized cardiovascular instrument for selected cardiac, aortic, and cardiothoracic procedures requiring controlled vascular occlusion. 6. Does the product title specify the jaw dimensions? No. The supplied title specifies the 10-inch length and Morris Long configuration but does not provide jaw length, jaw angle, tooth pattern, or clamping force. These details should be confirmed with the manufacturer. 7. What material is commonly used for an ascending aorta clamp? Reusable cardiovascular clamps are commonly manufactured from surgical-grade stainless steel or another suitable surgical instrument material. Exact material specifications should be confirmed with the manufacturer.