14″ VATS Harken #1 Clamp 10mm Shaft, 95mm DeBakey 1×2 Jaws

The 14″ VATS Harken #1 Clamp 10mm Shaft, 95mm DeBakey 1×2 Jaws is a specialized surgical instrument designed for Video-Assisted Thoracic Surgery (VATS) and other appropriate minimally invasive thoracic procedures. This Harken #1 clamp combines an extended 14-inch instrument length with a 10mm shaft and 95mm DeBakey 1×2 jaws, providing a specialized configuration for controlled tissue manipulation and access within the thoracic operative field. The 10mm shaft provides a defined minimally invasive profile for use with compatible thoracoscopic access systems. A properly sized shaft allows the instrument to be introduced through an appropriate port while the surgeon maintains control of the handle outside the body. Shaft diameter is an important consideration when selecting VATS instruments because the instrument must be compatible with the access equipment used for the procedure. The 14-inch overall length provides extended reach for thoracoscopic and minimally invasive applications. Longer instruments can be useful when the surgical target is positioned deeper within the thoracic cavity or when additional working distance is required. The extended profile allows the surgeon to manipulate the working end while maintaining an appropriate hand position outside the operative field. This model features 95mm DeBakey 1×2 jaws . The DeBakey jaw pattern provides a specialized tissue-contact surface intended for controlled engagement with suitable anatomical structures. The 1×2 configuration identifies the tooth arrangement of the jaw and distinguishes this clamp from other DeBakey jaw patterns. The 95mm specification identifies the supplied jaw or working configuration and should be considered when selecting instruments for a specific VATS procedure. The Harken #1 configuration is intended for specialized thoracic surgical applications where controlled instrument positioning and tissue handling are required. It may be incorporated into VATS instrument sets, thoracoscopic surgical trays, minimally invasive thoracic surgery sets, pulmonary surgery instrument collections, and cardiothoracic instrument systems . The precise clinical application should always be determined by trained surgical professionals based on patient anatomy, procedure requirements, and established surgical technique. The DeBakey 1×2 jaws are designed to provide controlled engagement with appropriate tissues. Proper positioning and pressure are important during use, particularly when manipulating delicate anatomical structures. The instrument should not be applied with excessive force and should only be used for tissue types and surgical applications appropriate to its design. The combination of an extended shaft configuration and DeBakey jaw design supports controlled manipulation from outside the thoracic cavity. This is particularly important in minimally invasive surgery, where the surgeon must coordinate handle movements with the working end through a limited access pathway. The 95mm working configuration provides a defined jaw profile while the 10mm shaft maintains the specified minimally invasive diameter. For reusable instrument configurations, appropriate cleaning and sterilization are essential. Following each procedure, the VATS Harken #1 Clamp should be cleaned promptly and thoroughly according to the healthcare facility’s validated instrument-processing protocol. Special attention should be given to the shaft, DeBakey jaw surfaces, tooth pattern, hinge, and other working components where biological material may accumulate. After cleaning, the instrument should be inspected for proper jaw alignment, tooth integrity, shaft condition, and smooth mechanical operation. Any deformation, damage, corrosion, or abnormal movement should be evaluated before the instrument is returned to service. Sterilization should be performed using a validated method consistent with applicable manufacturer instructions and institutional procedures. Proper handling and storage are also important for maintaining the instrument’s working condition. Surgical personnel should avoid unnecessary impacts, bending, or mechanical stress and should store the clamp in a manner that protects its shaft and working jaws. Routine inspection can help identify wear before it affects instrument performance. For hospitals, thoracic surgeons, minimally invasive surgery centers, operating-room professionals, and medical instrument suppliers, the 14″ VATS Harken #1 Clamp with 10mm Shaft and 95mm DeBakey 1×2 Jaws offers a specialized solution for controlled tissue handling and extended access during thoracoscopic procedures. Its long 14-inch profile, 10mm shaft, and DeBakey 1×2 jaw configuration make it a practical addition to professional VATS surgical instrument inventories. Key Features 14-inch VATS Harken #1 Clamp configuration 10mm shaft diameter 95mm DeBakey working or jaw configuration DeBakey 1×2 jaw pattern Designed for controlled tissue manipulation Suitable for video-assisted thoracic surgery Extended length provides useful reach within the thoracic cavity 10mm shaft supports compatible minimally invasive access systems DeBakey jaws provide controlled engagement with suitable tissue Suitable for VATS and thoracoscopic surgical instrument sets Designed for professional thoracic surgical applications Requires appropriate cleaning, inspection, and sterilization Product Specifications Specification Details Product Name VATS Harken #1 Clamp Product Type Thoracoscopic Surgical Clamp Overall Length 14″ Shaft Diameter 10mm Jaw / Working Length 95mm Jaw Type DeBakey Jaw Pattern DeBakey 1×2 Instrument Design VATS / Minimally Invasive Primary Application Thoracic Surgery Intended Use Controlled Tissue Handling and Manipulation Access Compatible Thoracoscopic Access System Construction Surgical Instrument Sterilization According to validated facility protocol and manufacturer guidance Intended Users Trained Surgical Professionals FAQs 1. What is a VATS Harken #1 Clamp used for? The VATS Harken #1 Clamp is designed for controlled tissue manipulation during VATS and other appropriate minimally invasive thoracic surgical procedures. 2. What is the shaft diameter of this Harken #1 Clamp? This model features a 10mm shaft , designed for use with compatible thoracoscopic access systems. 3. How long is the VATS Harken #1 Clamp? The instrument has an overall length of 14 inches , providing extended reach for appropriate thoracoscopic procedures. 4. What are the jaw specifications? The clamp features 95mm DeBakey 1×2 jaws , providing a specialized tooth configuration for controlled engagement with suitable tissues. 5. What does DeBakey 1×2 mean? DeBakey 1×2 identifies the specialized tooth arrangement of the jaw, designed to provide defined tissue engagement during surgical manipulation. 6. Is this Harken clamp suitable for VATS surgery? Yes. The 10mm shaft and extended configuration are designed for appropriate VATS and thoracoscopic surgical applications using compatible access equipment. 7. How should this VATS clamp be maintained? The instrument should be thoroughly cleaned and decontaminated after use, then inspected for jaw alignment, tooth integrity, shaft condition, and mechanical function before sterilization according to validated procedures.