3 1/2″ Gregory “Soft” Bulldog Clamp 1x2tth Straight 27mm Jaw

The 3 1/2″ Gregory “Soft” Bulldog Clamp 1x2tth Straight 27mm Jaw is a specialized vascular surgical instrument designed for controlled temporary occlusion and manipulation of appropriate blood vessels during cardiovascular and vascular procedures. Its compact 3 1/2-inch overall length, straight 27mm jaw, and 1×2-tooth configuration provide a defined working profile for surgical teams requiring precise and localized vessel control. Bulldog clamps are designed to provide temporary occlusion of blood vessels while maintaining a practical operating environment for the surgical team. They are commonly incorporated into vascular and cardiovascular instrument sets where temporary interruption or control of blood flow is required during selected surgical techniques. The specific vessel, duration of application, and surgical use should always be determined by the operating surgeon according to the patient’s anatomy and the requirements of the procedure. The Gregory “Soft” configuration is intended for controlled vascular handling. The straight jaw offers a direct approach to the target vessel, while the 27mm jaw length provides a compact working area. The 1×2-tooth configuration is a defining characteristic of this model and provides a specific contact pattern for controlled engagement of an appropriately sized vessel. The 3 1/2-inch overall length makes this clamp particularly useful when a compact instrument is preferred. A shorter vascular clamp can provide direct handling in confined operative fields while reducing unnecessary instrument bulk around the surgical site. Its compact profile can be useful in procedures where precision and accessibility are important. The 27mm jaw length should be considered when selecting the clamp for a particular application. Jaw length is one factor in determining whether a vascular instrument is appropriate for a surgical site, but it should not be treated as a universal vessel-size recommendation. Vessel diameter, anatomical location, tissue characteristics, and the intended surgical technique must all be considered by qualified clinical personnel. The 1×2-tooth jaw configuration provides a defined interface between the instrument and the vessel. Because vascular tissue can be delicate, the clamp should be positioned and operated carefully, using only the pressure necessary for the intended surgical purpose. Appropriate surgical technique and professional clinical judgment are essential when applying any vascular occlusion instrument. The clamp is generally manufactured from surgical-grade stainless steel or another suitable surgical instrument material. Stainless steel is commonly selected for reusable surgical instruments because it offers strength, durability, corrosion resistance, and compatibility with appropriate cleaning and sterilization procedures. Exact material composition and finish should be confirmed against the manufacturer’s product specifications. The Gregory “Soft” Bulldog Clamp can be included in cardiovascular surgical instrument sets, vascular surgery trays, thoracic surgery collections, and specialized vessel-control systems. Its compact dimensions make it a useful option where a smaller bulldog clamp is required alongside other vascular clamps of varying lengths and jaw configurations. Proper care and reprocessing are essential for maintaining surgical instrument performance. Following use, the clamp should be cleaned promptly according to the manufacturer’s validated instructions. Particular attention should be given to the 27mm jaw, tooth surfaces, hinge, and other mechanical components to remove biological material and cleaning residue. After cleaning, the instrument should be thoroughly rinsed and dried before inspection. The clamp should be examined for proper jaw alignment, tooth integrity, smooth mechanical action, corrosion, surface damage, and other abnormalities. Any instrument that shows deformation or does not function correctly should be removed from clinical service and assessed by qualified personnel. If the instrument is reusable, sterilization should be performed according to the manufacturer’s validated instructions and the healthcare facility’s approved sterilization protocol. Effective cleaning before sterilization is essential for proper instrument processing. Once sterilized, the clamp should be stored in a clean, dry environment that protects its working end and mechanical components from impact, moisture, and contamination. The 3 1/2″ Gregory “Soft” Bulldog Clamp combines a compact surgical profile with a straight 27mm jaw and 1×2-tooth configuration. It provides a specialized solution for professional surgical teams requiring controlled temporary vessel occlusion and precise vascular handling. Key Features Gregory “Soft” Bulldog Clamp configuration 3 1/2″ overall instrument length Straight jaw design 27mm jaw length 1×2-tooth jaw configuration Designed for controlled temporary vascular occlusion Suitable for selected cardiovascular and vascular procedures Compact profile for confined operative fields Supports precise vessel positioning and handling Durable surgical instrument construction Suitable for professional vascular instrument sets Designed for appropriate cleaning and sterilization procedures Product Specifications Specification Details Product Name Gregory “Soft” Bulldog Clamp Instrument Type Bulldog Vascular Clamp Overall Length 3 1/2″ Jaw Type Straight Jaw Length 27mm Tooth Configuration 1×2 Teeth Primary Function Temporary vascular occlusion Surgical Specialty Vascular Surgery, Cardiovascular Surgery Application Vessel control and temporary occlusion Design Compact Bulldog Clamp Construction Surgical-grade instrument material Reusable Subject to manufacturer specifications Sterilization According to validated sterilization protocols FAQs 1. What is the 3 1/2″ Gregory “Soft” Bulldog Clamp used for? It is designed for controlled temporary occlusion and manipulation of appropriate blood vessels during selected vascular and cardiovascular surgical procedures. 2. What is the jaw length of this Gregory Bulldog Clamp? This model features a 27mm straight jaw . 3. What is the overall length of the clamp? The overall instrument length is 3 1/2 inches . 4. What does the 1×2-tooth configuration mean? The 1×2 designation identifies the specific tooth arrangement of the clamp jaws, providing a defined contact configuration for controlled vessel engagement. 5. Is this clamp suitable for vascular surgery? Yes. It is designed as a specialized bulldog vascular clamp for selected procedures requiring temporary and localized vessel occlusion. 6. What is the benefit of a straight jaw? A straight jaw provides a direct working orientation that can facilitate positioning on an appropriately accessible vessel during surgical procedures. 7. Why is the Gregory Bulldog Clamp described as “Soft”? “Soft” identifies the specific Gregory clamp configuration. The precise mechanical pressure and tissue-handling characteristics should be verified from the manufacturer’s specifications.