4 1/2″ Gregory “Soft” Bulldog Clamp 1x2tth Straight 44mm Jaw

The 4 1/2″ Gregory “Soft” Bulldog Clamp 1x2tth Straight 44mm Jaw is a specialized vascular surgical instrument designed for temporary occlusion and controlled handling of blood vessels during delicate surgical procedures. With an overall length of 4 1/2 inches, a straight 44mm jaw, and a 1×2-tooth configuration, this bulldog clamp provides a compact working profile for surgeons requiring precise access and controlled vascular management. Bulldog clamps are commonly used in vascular and cardiovascular surgery when temporary control of blood flow is required. The clamp is designed to provide localized occlusion of an appropriately sized vessel, allowing the surgical team to establish a controlled operative field during selected vascular procedures. The exact application and suitability depend on the vessel characteristics, surgical approach, and surgeon’s preferred technique. The Gregory “Soft” configuration is particularly suited to applications where controlled vessel handling is important. The 1×2-tooth jaw pattern provides a defined contact configuration while the straight 44mm jaw offers a direct working orientation. Because vascular tissues are delicate, the instrument should always be applied with appropriate technique and only with the amount of force necessary for the intended procedure. Its 4 1/2-inch overall length provides a compact format that can be advantageous when working in confined surgical fields. A shorter vascular clamp can provide the surgeon with direct control while helping minimize unnecessary instrument bulk around the operative site. The straight jaw geometry also provides a predictable approach when positioning the clamp on an accessible vessel. The 44mm jaw length provides an extended contact area relative to many smaller bulldog-style clamps. This can be useful when the surgeon requires a specific working length for the target vessel. However, jaw dimensions should not be interpreted as a universal vessel-size recommendation. Clinical suitability should be assessed by a qualified surgeon based on vessel diameter, anatomy, tissue condition, and procedure requirements. The 1×2-tooth configuration is an important identifying feature of this Gregory bulldog clamp. The teeth provide a defined jaw interface designed for controlled engagement with the vessel. Proper application is essential because excessive pressure, inappropriate positioning, or prolonged occlusion can potentially affect delicate vascular tissue. The clamp should therefore be used according to established surgical protocols. Professional vascular clamps are commonly manufactured from surgical-grade stainless steel or other suitable surgical materials. Stainless steel is widely used for reusable surgical instruments because of its strength, corrosion resistance, durability, and compatibility with appropriate cleaning and sterilization procedures. Exact material composition, surface finish, and mechanical specifications should be confirmed with the manufacturer. The Gregory Soft Bulldog Clamp can be incorporated into cardiovascular surgical instrument sets, vascular surgery trays, thoracic surgery collections, and specialized vascular repair systems. It can complement other instruments such as vascular forceps, vessel dilators, vascular scissors, needle holders, and additional atraumatic or temporary occlusion clamps. Proper maintenance is essential for preserving the clamp’s mechanical performance. After use, it should be cleaned promptly according to the manufacturer’s validated instructions. Special attention should be given to the jaw surfaces, teeth, joints, and contact areas to ensure that biological material and cleaning residues are removed. After cleaning, the instrument should be thoroughly rinsed and dried before inspection. Surgical staff should check the jaw alignment, tooth condition, opening and closing action, spring or locking mechanism where applicable, and overall structural integrity. Any clamp showing deformation, corrosion, damaged teeth, or abnormal operation should be removed from service and evaluated by qualified personnel. If the instrument is supplied as reusable, sterilization should be performed according to the manufacturer’s validated instructions and the healthcare facility’s approved sterilization protocol. Proper cleaning before sterilization is essential for effective reprocessing. Following sterilization, the clamp should be stored in a clean, dry environment where the jaw and mechanical components are protected from impact and damage. The 4 1/2″ Gregory “Soft” Bulldog Clamp combines a compact surgical profile with a straight 44mm jaw and specialized 1×2-tooth configuration. It is a practical addition to professional vascular and cardiovascular instrument inventories where controlled temporary vessel occlusion and precise surgical handling are required. Key Features Gregory “Soft” bulldog vascular clamp design 4 1/2-inch overall instrument length Straight jaw configuration 44mm jaw length 1×2-tooth jaw pattern Designed for controlled temporary vascular occlusion Suitable for selected cardiovascular and vascular procedures Compact profile for confined operative fields Supports precise vessel handling Precision surgical instrument construction Suitable for professional vascular instrument sets Designed for appropriate cleaning and sterilization procedures Product Specifications Specification Details Product Name Gregory “Soft” Bulldog Clamp Instrument Type Bulldog Vascular Clamp Overall Length 4 1/2″ Jaw Type Straight Jaw Length 44mm Jaw Pattern 1×2 Teeth Primary Function Temporary vascular occlusion Surgical Specialty Vascular Surgery, Cardiovascular Surgery Application Vessel control and temporary occlusion Design Compact Bulldog Clamp Construction Surgical-grade instrument material Reusable Subject to manufacturer specifications Sterilization According to validated sterilization protocols FAQs 1. What is a Gregory Soft Bulldog Clamp used for? The Gregory Soft Bulldog Clamp is designed for controlled temporary occlusion and handling of blood vessels during selected vascular and cardiovascular surgical procedures. 2. What is the jaw length of this Gregory Bulldog Clamp? This model features a 44mm straight jaw . 3. What does 1×2 teeth mean on a bulldog clamp? The 1×2 designation describes the tooth configuration of the clamp jaws, providing a defined contact pattern for controlled vessel engagement. 4. How long is the Gregory Soft Bulldog Clamp? The overall instrument length is 4 1/2 inches . 5. Is this bulldog clamp suitable for vascular surgery? Yes. Bulldog clamps are commonly used in selected vascular procedures where temporary, localized vessel occlusion is required. 6. Why is the clamp called a “Soft” Bulldog Clamp? The “Soft” designation identifies the specific Gregory bulldog configuration. The actual pressure and tissue-handling characteristics should be confirmed from the manufacturer’s specifications. 7. What is the advantage of a straight jaw? A straight jaw provides a direct working orientation that can facilitate controlled positioning on an accessible vessel during appropriate surgical procedures.