5″ Castaneda Clamp Curved Shank, Angled Jaw 50°

The 5″ Castaneda Clamp Curved Shank, Angled Jaw 50° is a specialized vascular and cardiovascular surgical instrument designed to assist with controlled manipulation, positioning, and temporary occlusion of appropriately sized blood vessels during selected surgical procedures. With a compact 5-inch overall length, curved shank, and 50-degree angled jaw , this clamp provides a specialized working geometry for operative fields where directional access and controlled vessel handling are important. The 50° angled jaw positions the working end at an angle relative to the main instrument axis. This configuration can help the surgeon approach a target vascular structure from an offset direction while maintaining a controlled hand position. Angled jaws can be useful in selected procedures where direct axial access is limited by surrounding anatomy or by the orientation of the surgical exposure. The curved shank further contributes to the instrument’s offset profile. By creating additional clearance between the handle and working end, the curved shank may help the surgeon navigate around adjacent structures while maintaining appropriate visualization and instrument control. The combination of curved shank and angled jaw provides a specialized approach for selected vascular applications. At 5 inches overall length , the Castaneda Clamp offers a compact balance between reach and maneuverability. Its relatively short profile can facilitate close control near the operative site while minimizing unnecessary instrument bulk. This may be particularly useful in cardiovascular and vascular procedures where precise positioning is essential. A vascular clamp of this type may be incorporated into selected cardiovascular, vascular, thoracic, and reconstructive surgical procedures requiring controlled vessel manipulation or temporary occlusion. Depending on the specific surgical technique, the instrument may assist with vessel isolation, positioning, repair, reconstruction, or anastomotic procedures. The exact indication and application should always be determined by qualified surgical professionals. The specialized geometry of this Castaneda clamp is intended to support controlled access rather than dictate a particular surgical technique. Proper instrument selection should take into account the patient’s anatomy, target vessel size, surgical exposure, and procedural requirements. The clamp should be applied carefully and only when its configuration is appropriate for the intended vascular structure. Controlled handling is particularly important when working with delicate vascular tissue. The 50° angled jaws should be accurately positioned before application, and only the force necessary for the intended clinical purpose should be used. Excessive compression, twisting, bending, or inappropriate leverage should be avoided to help reduce the risk of tissue trauma and preserve the instrument’s mechanical integrity. The instrument is typically manufactured from surgical-grade stainless steel , providing strength, durability, and corrosion resistance appropriate for professional reusable surgical instrumentation. Precision manufacturing supports reliable jaw alignment and consistent mechanical performance. A smooth surface finish facilitates routine cleaning, inspection, and maintenance. After use, reusable instruments should be promptly cleaned and decontaminated according to established healthcare-facility procedures. Particular attention should be given to the 50° angled jaw, curved shank, hinge, and adjoining surfaces , where blood and biological residue may accumulate. The clamp should be inspected for corrosion, wear, deformation, surface damage, and jaw alignment before sterilization. Sterilization should be performed using a validated method compatible with the manufacturer’s instructions and institutional infection-control requirements. Proper storage and careful handling help maintain the angled jaw geometry, curved shank profile, and overall mechanical performance. The 5″ Castaneda Clamp Curved Shank, Angled Jaw 50° combines a compact design with a specialized curved shank and 50° angled working end. Its directional geometry, maneuverability, and durable construction make it a practical addition to professional vascular and cardiovascular surgical instrument sets requiring controlled vessel manipulation. Key Features Castaneda pattern vascular clamp 5-inch overall length Curved shank configuration 50° angled jaw Provides an offset working approach Supports controlled temporary vascular occlusion Facilitates precise vessel manipulation and positioning Curved shank helps provide clearance around adjacent anatomy Angled jaw supports directional access to selected vessels Compact profile for confined operative fields Surgical-grade stainless steel construction Product Specifications Specification Details Product Name Castaneda Clamp Overall Length 5″ Shank Configuration Curved Jaw Configuration Angled Jaw Angle 50° Instrument Type Vascular / Cardiovascular Clamp Primary Function Vessel manipulation and temporary vascular occlusion Intended Application Appropriately sized vascular structures Surgical Specialty Vascular / Cardiovascular Surgery Typical Application Vessel control, positioning, isolation, repair, and manipulation Design Curved shank with 50° angled jaw Material Surgical-grade stainless steel Reusable Yes, for reusable models Sterilization Follow validated manufacturer and facility protocols FAQs 1. What is a Castaneda Clamp used for? The Castaneda Clamp is designed for controlled manipulation, positioning, and temporary occlusion of appropriately sized vascular structures during selected cardiovascular and vascular procedures. 2. What is the overall length of this Castaneda Clamp? The overall length is 5 inches , providing a compact and maneuverable surgical profile. 3. What does the 50° angled jaw provide? The 50° jaw angle provides a directional working approach that can facilitate access to selected vessels when direct axial access is restricted. 4. What is the purpose of the curved shank? The curved shank creates an offset between the handle and working end, which can help provide clearance around adjacent anatomical structures. 5. Can this clamp be used for temporary vascular occlusion? Yes. It is designed to support temporary vascular occlusion when appropriate for the target vessel and surgical technique. 6. Which surgical specialties may use this clamp? It may be incorporated into selected vascular and cardiovascular surgical instrument sets, depending on the specific procedure and clinical requirements. 7. What material is the Castaneda Clamp made from? It is typically manufactured from surgical-grade stainless steel for strength, durability, and corrosion resistance. 8. How should the Castaneda Clamp be sterilized? Reusable models should be cleaned, inspected, and sterilized using a validated process according to the manufacturer’s instructions and healthcare-facility sterilization protocols.