5″ Neonatal Vascular Clamp Jaws 90°, Curved Shanks

The 5″ Neonatal Vascular Clamp Jaws 90°, Curved Shanks is a specialized vascular surgical instrument designed for controlled manipulation, positioning, and temporary occlusion of appropriately sized neonatal blood vessels. Its 5-inch overall length combines 90° jaws with curved shanks , creating a specialized working geometry intended to improve access and maneuverability during delicate neonatal and pediatric vascular procedures. The 90° jaw orientation positions the working end at a right angle to the instrument’s primary shaft direction. This configuration can allow the surgeon to approach a target vessel from a perpendicular direction while maintaining a controlled hand position. Such geometry can be particularly useful in operative fields where direct axial access is restricted by surrounding anatomical structures. The curved shanks provide an additional offset between the handle and working end. This curved profile can help the surgeon navigate around adjacent anatomy and position the jaws appropriately without requiring the entire instrument to follow a straight path. The combination of curved shanks and 90° jaws offers a specialized configuration for selected confined surgical fields. At 5 inches overall length , the clamp provides a compact balance between working reach and maneuverability. Its relatively short profile can support close control around small anatomical structures while minimizing unnecessary instrument bulk. This makes the instrument suitable for consideration in specialized neonatal cardiovascular and vascular instrument sets. The neonatal designation indicates that this instrument is intended for selected applications involving appropriately sized neonatal vascular structures. Neonatal vessels are small and delicate, so appropriate jaw dimensions and instrument geometry are important. The surgeon should evaluate the patient’s anatomy, vessel size, operative exposure, and specific procedure before selecting the clamp. A neonatal vascular clamp may be used when temporary localized control of blood flow is required. Depending on the surgical technique, it may assist with vessel isolation, positioning, repair, reconstruction, or other procedures requiring controlled vascular occlusion. The specific indication and method of use should be determined by qualified surgical professionals. The specialized 90° working-end configuration can provide useful access in areas where a conventional straight vascular clamp may be less suitable. The curved shanks may further support maneuverability around nearby anatomical structures. These design characteristics are intended to provide controlled positioning rather than replace appropriate surgical judgment or technique. The instrument is typically manufactured from surgical-grade stainless steel , providing strength, durability, and corrosion resistance suitable for professional reusable surgical instrumentation. Precision manufacturing supports consistent working-end alignment and reliable mechanical operation. A smooth surface finish facilitates routine cleaning, inspection, and maintenance. Careful handling is essential when using the clamp around delicate neonatal vascular anatomy. The jaws should be positioned accurately and applied with only the force necessary for the intended clinical purpose. Excessive compression, twisting, bending, or inappropriate leverage should be avoided to help minimize the risk of tissue trauma and instrument deformation. Following use, reusable instruments should be promptly cleaned and decontaminated according to established healthcare-facility procedures. Particular attention should be given to the 90° jaws, curved shanks, hinge, and adjoining surfaces , where blood and biological residue may accumulate. The clamp should be inspected for corrosion, wear, deformation, surface damage, and jaw alignment before sterilization. Sterilization should be performed using a validated process compatible with the manufacturer’s instructions and institutional infection-control requirements. Proper storage and careful handling help preserve the right-angle jaw orientation, curved shank geometry, and overall mechanical integrity. The 5″ Neonatal Vascular Clamp Jaws 90°, Curved Shanks combines a compact neonatal profile with a right-angle working end and curved shank configuration. Its specialized geometry, maneuverability, and durable construction make it a practical addition to professional neonatal and pediatric vascular surgical instrument sets. Key Features Specialized neonatal vascular clamp 5-inch overall length 90° jaw orientation Curved shank configuration Designed for appropriately sized neonatal vessels Supports controlled temporary vascular occlusion Provides perpendicular access to selected vascular structures Curved profile helps navigate around adjacent anatomy Compact design for confined operative fields Surgical-grade stainless steel construction Durable design for professional reusable instrumentation Product Specifications Specification Details Product Name Neonatal Vascular Clamp Overall Length 5″ Jaw Orientation 90° Shank Configuration Curved Configuration Neonatal Instrument Type Vascular Clamp Primary Function Temporary vascular occlusion and vessel manipulation Intended Application Appropriately sized neonatal vascular structures Surgical Specialty Neonatal / Pediatric Cardiovascular and Vascular Surgery Typical Application Vessel control, positioning, isolation, and manipulation Design Curved shanks with 90° jaws Material Surgical-grade stainless steel Reusable Yes, for reusable models Sterilization Follow validated manufacturer and facility protocols FAQs 1. What is a neonatal vascular clamp used for? It is designed for controlled manipulation, positioning, and temporary occlusion of appropriately sized neonatal vascular structures during selected vascular procedures. 2. What is the overall length of this neonatal vascular clamp? The overall length is 5 inches , providing a compact and maneuverable surgical profile. 3. What is the advantage of 90° jaws? The 90° jaw orientation allows the working end to approach selected vessels perpendicularly, which can facilitate access in confined operative fields. 4. Why are the shanks curved? Curved shanks provide an offset working trajectory that can help the surgeon navigate around adjacent anatomical structures. 5. Is this clamp intended for neonatal vascular surgery? Yes. Its configuration is intended for selected applications involving appropriately sized neonatal vascular structures. Suitability should be determined according to the patient’s anatomy and procedure. 6. Can this clamp be used for temporary vascular occlusion? Yes. It is designed to support temporary vascular occlusion when appropriate for the target vessel and surgical technique. 7. What material is the neonatal vascular clamp made from? It is typically manufactured from surgical-grade stainless steel for strength, durability, and corrosion resistance. 8. Can this neonatal vascular clamp be sterilized? Reusable models should be cleaned, inspected, and sterilized using a validated process according to the manufacturer’s instructions and healthcare-facility sterilization protocols.