6 1/2″ Cooley Derra Anastomosis Clamp Large Jaw

The 6 1/2″ Cooley Derra Anastomosis Clamp Large Jaw is a specialized cardiovascular and vascular surgical instrument designed to assist with controlled manipulation, positioning, and temporary occlusion of appropriately sized blood vessels. With an overall length of 6.5 inches and a large jaw configuration, this Cooley Derra clamp provides an extended working profile for selected procedures requiring controlled vascular access and vessel stabilization. The instrument is identified as an anastomosis clamp , making it suitable for selected vascular repair, reconstruction, and anastomotic procedures. During vascular anastomosis, temporary control of the target vessel can help provide a stable operative field for precise surgical work. The exact clinical application and method of use should be determined by a qualified cardiovascular or vascular surgical professional. The large jaw configuration provides an increased working surface compared with smaller-jaw vascular clamps. This can be useful when the target anatomy requires a larger contact area or when a broader vessel segment needs to be controlled. The appropriate jaw size should always be selected according to the patient’s anatomy, vessel dimensions, and surgical technique. The Cooley Derra pattern provides a specialized configuration associated with cardiovascular surgical instrumentation. Its design is intended to support controlled vascular access while maintaining practical instrument maneuverability. The combination of a 6.5-inch length and large working jaw can provide useful reach and handling during selected cardiovascular and vascular procedures. At 6.5 inches overall length , the clamp offers a balance between reach and close instrument control. This length can be advantageous when accessing vessels located deeper within an operative field while still allowing precise manipulation. The working end can be positioned around the target vessel according to the surgical approach and anatomical requirements. A large-jaw anastomosis clamp may be incorporated into selected cardiovascular, vascular, thoracic, and reconstructive surgical procedures where controlled vessel positioning or temporary occlusion is required. Potential applications may include vessel isolation, repair, reconstruction, and anastomosis. These applications depend on the specific instrument configuration and clinical technique. Instrument selection is particularly important when using a large-jaw clamp. The working dimensions should correspond appropriately to the target vessel and surgical exposure. The clamp should not be applied simply because of its larger jaw profile; the surgical team should confirm its suitability for the intended anatomy and procedure. Controlled application is essential when working with vascular tissue. The large jaws should be accurately positioned before application, and only the force necessary for the intended clinical purpose should be used. Excessive compression, twisting, bending, or inappropriate leverage should be avoided to help minimize potential vascular tissue trauma and preserve instrument integrity. The instrument is typically manufactured from surgical-grade stainless steel , providing strength, durability, and corrosion resistance appropriate for professional reusable surgical instrumentation. Precision manufacturing supports dependable jaw alignment and consistent mechanical performance. A smooth surface finish also facilitates routine cleaning, inspection, and maintenance. After use, reusable instruments should be promptly cleaned and decontaminated according to established healthcare-facility procedures. Particular attention should be given to the large jaws, hinge, and adjoining working surfaces , where blood and biological residue may accumulate. The clamp should be inspected for corrosion, wear, deformation, surface damage, and jaw alignment before sterilization. Sterilization should be performed using a validated method compatible with the manufacturer’s instructions and institutional infection-control requirements. Proper storage and careful handling help preserve the large-jaw geometry and overall mechanical performance. The 6 1/2″ Cooley Derra Anastomosis Clamp Large Jaw combines a useful 6.5-inch working length with a large-jaw configuration designed for controlled vascular handling. Its specialized design, maneuverability, and durable construction make it a practical addition to professional cardiovascular and vascular surgical instrument sets. Key Features Cooley Derra pattern anastomosis clamp 6.5-inch overall length Large jaw configuration Designed for selected vascular anastomosis procedures Supports controlled temporary vascular occlusion Facilitates vessel positioning and manipulation Provides an extended working surface Useful reach for selected deeper operative fields Suitable for cardiovascular and vascular procedures Precision-oriented working-end design Surgical-grade stainless steel construction Durable design for professional reusable instrumentation Product Specifications Specification Details Product Name Cooley Derra Anastomosis Clamp Overall Length 6 1/2″ Jaw Configuration Large Jaw Instrument Type Anastomosis / Vascular Clamp Primary Function Vessel positioning, manipulation, and temporary occlusion Intended Application Appropriately sized vascular structures Surgical Specialty Cardiovascular / Vascular Surgery Typical Application Vascular anastomosis, repair, reconstruction, and vessel control Design Cooley Derra large-jaw configuration Material Surgical-grade stainless steel Reusable Yes, for reusable models Sterilization Follow validated manufacturer and facility protocols FAQs 1. What is the Cooley Derra Anastomosis Clamp used for? It is designed to assist with controlled vessel positioning, manipulation, and temporary occlusion during selected vascular anastomosis, repair, and reconstruction procedures. 2. What is the overall length of this Cooley Derra clamp? The overall length is 6.5 inches , providing useful reach while maintaining practical maneuverability. 3. What does the large jaw configuration provide? The large jaw provides an extended working surface for controlled engagement of appropriately sized vascular structures. 4. Is this clamp suitable for vascular anastomosis? It is designed for selected vascular anastomotic applications where its size and jaw configuration are appropriate for the target vessel and surgical technique. 5. Can this clamp be used for temporary vascular occlusion? Yes. It is designed to support temporary vascular occlusion when appropriate for the target vessel and procedure. 6. Which specialties may use this Cooley Derra clamp? It may be incorporated into selected cardiovascular, vascular, and thoracic surgical instrument sets. 7. What material is the Cooley Derra Anastomosis Clamp made from? It is typically manufactured from surgical-grade stainless steel for strength, durability, and corrosion resistance. 8. How should the large-jaw clamp be sterilized? Reusable models should be cleaned, inspected, and sterilized using a validated process according to the manufacturer’s instructions and healthcare-facility sterilization protocols.