6 1/2″ Cooley Derra Anastomosis Clamp Small Jaw 2cm

The 6 1/2″ Cooley Derra Anastomosis Clamp Small Jaw 2cm is a specialized cardiovascular and vascular surgical instrument designed to assist with controlled vessel positioning, manipulation, and temporary occlusion during selected vascular procedures. With an overall length of 6.5 inches and a 2cm small-jaw configuration , this clamp provides a focused working profile for precise access and controlled handling of appropriately sized vascular structures. The instrument is identified as an anastomosis clamp , making it suitable for selected vascular repair, reconstruction, and anastomotic procedures. During vascular anastomosis, controlled temporary occlusion or positioning of the target vessel can help provide a stable operative field for precise surgical work. The exact clinical indication and method of application should always be determined by a qualified cardiovascular or vascular surgical professional. The 2cm small jaw provides a focused working surface for engaging appropriately sized vessels. A smaller jaw profile can be advantageous when the surgical field requires more localized contact or when the target vessel is relatively small. Appropriate instrument selection is essential, and the jaw dimensions should be matched to the vessel anatomy and procedural requirements. The Cooley Derra pattern is associated with specialized cardiovascular surgical instrumentation. This configuration is intended to support controlled vessel access while providing practical instrument maneuverability. The combination of a 6.5-inch overall length and 2cm jaw creates a useful balance between reach and precision for selected vascular procedures. At 6.5 inches overall length , the clamp provides sufficient working reach for selected operative fields while retaining close control. This can be useful when the target vessel is positioned deeper within the surgical site. The compact 2cm jaw helps maintain a focused working interface at the vessel. A small-jaw anastomosis clamp may be incorporated into selected cardiovascular, vascular, thoracic, and reconstructive procedures requiring controlled vessel positioning or temporary occlusion. Potential applications include selected vascular anastomosis, vessel repair, reconstruction, isolation, and temporary blood-flow control. The suitability of the instrument depends on the specific procedure, vessel dimensions, and surgical technique. The combination of the 6.5-inch length and 2cm small jaw provides a specialized solution when a controlled, localized working surface is required. The surgical team should confirm the instrument’s dimensions and configuration before use, particularly when operating on delicate or small vascular structures. Controlled application is essential when working with vascular tissue. The jaws should be accurately positioned before application, and only the force necessary for the intended clinical purpose should be used. Excessive compression, twisting, bending, or inappropriate leverage should be avoided to help minimize potential vascular tissue trauma and preserve instrument integrity. The instrument is typically manufactured from surgical-grade stainless steel , providing strength, durability, and corrosion resistance suitable for professional reusable surgical instrumentation. Precision manufacturing supports reliable jaw alignment and consistent mechanical performance. A smooth surface finish facilitates routine cleaning, inspection, and maintenance. After use, reusable instruments should be promptly cleaned and decontaminated according to established healthcare-facility procedures. Particular attention should be given to the 2cm jaws, hinge, and adjoining working surfaces , where blood and biological residue may accumulate. The clamp should be inspected for corrosion, wear, deformation, surface damage, and jaw alignment before sterilization. Sterilization should be performed using a validated process compatible with the manufacturer’s instructions and institutional infection-control requirements. Proper storage and careful handling help preserve the small-jaw geometry and overall mechanical performance. The 6 1/2″ Cooley Derra Anastomosis Clamp Small Jaw 2cm combines a 6.5-inch working length with a focused 2cm jaw configuration for controlled vascular handling. Its precision-oriented design and durable construction make it a practical addition to professional cardiovascular and vascular surgical instrument sets. Key Features Cooley Derra pattern anastomosis clamp 6.5-inch overall length 2cm small jaw Designed for selected vascular anastomosis procedures Supports controlled temporary vascular occlusion Facilitates precise vessel positioning and manipulation Focused working surface for appropriately sized vessels Useful reach for selected deeper operative fields Suitable for cardiovascular and vascular procedures Precision-oriented working-end design Surgical-grade stainless steel construction Durable design for professional reusable instrumentation Product Specifications Specification Details Product Name Cooley Derra Anastomosis Clamp Overall Length 6 1/2″ Jaw Configuration Small Jaw Jaw Length 2cm Instrument Type Anastomosis / Vascular Clamp Primary Function Vessel positioning, manipulation, and temporary occlusion Intended Application Appropriately sized vascular structures Surgical Specialty Cardiovascular / Vascular Surgery Typical Application Vascular anastomosis, repair, reconstruction, and vessel control Design Small 2cm jaw configuration Material Surgical-grade stainless steel Reusable Yes, for reusable models Sterilization Follow validated manufacturer and facility protocols FAQs 1. What is the Cooley Derra Anastomosis Clamp used for? It is designed to assist with controlled vessel positioning, manipulation, and temporary occlusion during selected vascular anastomosis, repair, and reconstruction procedures. 2. What is the overall length of this clamp? The overall length is 6.5 inches , providing useful reach while maintaining practical maneuverability. 3. What is the jaw length? This model features a 2cm small jaw , providing a focused working surface for appropriately sized vascular structures. 4. What is the benefit of a small jaw? A small jaw provides a localized working interface that can be useful when controlled access to smaller or more confined vascular structures is required. 5. Can this clamp be used for temporary vascular occlusion? Yes. It is designed to support temporary vascular occlusion when appropriate for the target vessel and surgical technique. 6. Is this clamp suitable for vascular anastomosis? It is designed for selected anastomotic applications where its 2cm jaw and overall dimensions are appropriate for the target vessel. 7. What material is the Cooley Derra Anastomosis Clamp made from? It is typically manufactured from surgical-grade stainless steel for strength, durability, and corrosion resistance. 8. How should this clamp be sterilized? Reusable models should be cleaned, inspected, and sterilized using a validated process according to the manufacturer’s instructions and healthcare-facility sterilization protocols.