6 1/2″ Dardik Multi Purpose Clamp Angled 15°

The 6 1/2″ Dardik Multi Purpose Clamp Angled 15° is a specialized vascular and cardiovascular surgical instrument designed to assist with controlled manipulation, positioning, isolation, and temporary occlusion of appropriately sized blood vessels. With an overall length of 6.5 inches and a 15-degree angled configuration , this clamp provides a practical combination of working reach, maneuverability, and a subtle directional offset for selected vascular procedures. The 15° angled design creates a modest offset between the instrument shaft and working end. This configuration can allow the surgeon to approach a target vessel from a slightly angled direction while maintaining a controlled hand position. The relatively shallow angle can be useful when a small directional adjustment is desired without the more pronounced offset associated with highly angled vascular clamps. As a multi-purpose vascular clamp , this instrument may be incorporated into selected procedures requiring controlled vessel manipulation. Depending on the surgical technique, vascular clamps can assist with vessel positioning, isolation, temporary occlusion, repair, reconstruction, and selected anastomotic procedures. The exact indication and method of use should always be determined by a qualified vascular or cardiovascular surgical professional. The 6.5-inch overall length provides useful working reach while retaining practical maneuverability. This length can be advantageous when accessing vascular structures located deeper within the operative field. The 15° angled configuration can further help position the working end in relation to the target vessel while allowing the handle to remain in a controlled orientation. Compared with a straight configuration, the 15° angle provides a subtle directional change that may help accommodate the anatomy and operative exposure. This can be beneficial in selected cardiovascular and peripheral vascular procedures where precise instrument orientation is important. The exact jaw dimensions and working-end characteristics should be verified against the manufacturer’s specifications before use, particularly when precise vessel sizing is required. Instrument selection should take into consideration vessel diameter, anatomical location, surgical exposure, and the requirements of the specific procedure. Controlled application is essential when working with vascular tissue. The working end should be positioned accurately before application, and only the force necessary for the intended clinical purpose should be used. Excessive compression, twisting, bending, or inappropriate leverage should be avoided to help minimize potential vascular tissue trauma and preserve instrument integrity. The instrument is typically manufactured from surgical-grade stainless steel , providing mechanical strength, durability, and corrosion resistance appropriate for professional reusable surgical instrumentation. Precision manufacturing supports reliable working-end alignment and consistent mechanical performance. A smooth surface finish facilitates routine cleaning, inspection, and maintenance. After use, reusable instruments should be promptly cleaned and decontaminated according to established healthcare-facility procedures. Particular attention should be given to the 15° angled working end, hinge, and adjoining surfaces , where blood and biological residue may accumulate. The clamp should be inspected for corrosion, wear, deformation, surface damage, and alignment before sterilization. Sterilization should be performed using a validated process compatible with the manufacturer’s instructions and institutional infection-control requirements. Proper storage and careful handling help preserve the 15° angled geometry and overall mechanical performance. The 6 1/2″ Dardik Multi Purpose Clamp Angled 15° combines a versatile vascular clamp profile with a subtle 15° angled working configuration and 6.5-inch overall length. Its controlled directional offset, maneuverability, and durable construction make it a practical addition to professional cardiovascular and vascular surgical instrument sets. Key Features Dardik pattern multi-purpose vascular clamp 6.5-inch overall length 15° angled configuration Subtle offset working profile Designed for controlled vascular manipulation Supports temporary vascular occlusion Facilitates vessel positioning and isolation Useful reach for selected operative fields Suitable for selected cardiovascular and vascular procedures Precision-oriented working-end design Surgical-grade stainless steel construction Durable design for professional reusable instrumentation Product Specifications Specification Details Product Name Dardik Multi Purpose Clamp Overall Length 6 1/2″ Configuration Angled Angle 15° Instrument Type Multi-Purpose Vascular Clamp Primary Function Vessel manipulation, positioning, and temporary occlusion Intended Application Appropriately sized vascular structures Surgical Specialty Vascular / Cardiovascular Surgery Typical Application Vessel control, positioning, isolation, repair, and manipulation Design 15° angled vascular configuration Material Surgical-grade stainless steel Reusable Yes, for reusable models Sterilization Follow validated manufacturer and facility protocols FAQs 1. What is a Dardik Multi Purpose Clamp used for? It is designed for controlled manipulation, positioning, isolation, and temporary occlusion of appropriately sized vascular structures during selected vascular and cardiovascular procedures. 2. What is the overall length of this Dardik clamp? The overall length is 6.5 inches , providing useful reach while maintaining practical maneuverability. 3. What does the 15° angled configuration provide? The 15° angle provides a subtle offset working trajectory that can facilitate directional access while maintaining a relatively direct approach to the target vessel. 4. Can this Dardik clamp be used for temporary vascular occlusion? Yes. It is designed to support temporary vascular occlusion when appropriate for the target vessel and surgical technique. 5. Why use a 15° angle instead of a straight configuration? A 15° angle can provide a modest directional adjustment that may help accommodate the anatomy and surgical exposure without creating a pronounced working-end offset. 6. Which specialties may use this vascular clamp? It may be incorporated into selected vascular and cardiovascular surgical instrument sets. 7. What material is the Dardik Multi Purpose Clamp made from? It is typically manufactured from surgical-grade stainless steel for strength, durability, and corrosion resistance. 8. Can the Dardik Multi Purpose Clamp be sterilized? Reusable models should be cleaned, inspected, and sterilized using a validated process according to the manufacturer’s instructions and healthcare-facility sterilization protocols.