6 1/4″ Satinsky Vena Cava Clamp Cross Serrated Jaws

The 6 1/4″ Satinsky Vena Cava Clamp Cross Serrated Jaws is a specialized cardiovascular and vascular surgical instrument designed to assist with controlled vessel manipulation, positioning, isolation, and temporary occlusion during selected procedures. With an overall length of 6.25 inches and cross-serrated jaws , this Satinsky-style clamp provides a specialized working configuration for controlled vascular access. Satinsky clamps are widely associated with vascular and cardiovascular procedures requiring controlled partial or temporary vessel occlusion. The characteristic clamp configuration can allow the surgical team to control a portion of a vascular structure while maintaining access to the operative area. The exact indication and technique should always be determined by a qualified cardiovascular or vascular surgeon. The cross-serrated jaw design provides a textured contact surface intended to improve grip on the target vascular structure. Cross-serrations can help support controlled engagement and positioning when the clamp is applied according to established surgical technique. Because vascular tissue is delicate, the instrument must be selected and applied appropriately for the vessel size and clinical application. With an overall length of 6.25 inches , this clamp provides useful reach while maintaining practical maneuverability. The length can be beneficial when working within cardiovascular or vascular operative fields where controlled access to the target anatomy is required. Its specialized jaw configuration complements the Satinsky-style design by providing a defined working surface for vessel engagement. The clamp may be incorporated into selected cardiovascular, vascular, thoracic, and reconstructive procedures where temporary vascular control is required. Depending on the exact surgical application, such procedures may involve vessel repair, reconstruction, anastomosis, vessel isolation, or temporary occlusion. Instrument selection should always consider vessel diameter, anatomy, surgical exposure, and the requirements of the procedure. The cross-serrated jaws should be carefully matched to the intended clinical application. Before use, the surgical team should inspect the jaw alignment and working surfaces to ensure that the instrument is in suitable condition. Any instrument showing deformation, damage, corrosion, or impaired mechanical function should be removed from service. Controlled application is particularly important with serrated vascular instruments. The clamp should be positioned accurately before application, and only the force necessary for the intended clinical purpose should be used. Excessive compression, twisting, bending, or inappropriate leverage should be avoided to help minimize potential tissue trauma and preserve instrument integrity. The instrument is typically manufactured from surgical-grade stainless steel , providing strength, durability, and corrosion resistance suitable for professional reusable surgical instrumentation. Precision manufacturing supports consistent jaw alignment and mechanical performance. A smooth external finish also facilitates routine cleaning, inspection, and maintenance. After use, reusable instruments should be promptly cleaned and decontaminated according to established healthcare-facility procedures. Particular attention should be given to the cross-serrated jaws, hinge, and adjoining surfaces , where blood and biological residue can accumulate. Serrations should be thoroughly cleaned without using methods that could damage the working surface. Sterilization should be performed using a validated process compatible with the manufacturer’s instructions and institutional infection-control requirements. Proper storage and careful handling help maintain the cross-serrated jaw pattern and overall mechanical performance. The 6 1/4″ Satinsky Vena Cava Clamp Cross Serrated Jaws combines a 6.25-inch overall length with a specialized cross-serrated working surface. Its Satinsky-style configuration, controlled vessel engagement, and durable construction make it a practical addition to professional cardiovascular and vascular surgical instrument sets. Key Features Satinsky-style vena cava vascular clamp 6.25-inch overall length Cross-serrated jaw configuration Designed for controlled vascular occlusion Supports vessel manipulation and positioning Textured jaws provide secure working-end engagement Suitable for selected cardiovascular and vascular procedures Useful reach for operative vascular fields Supports vessel isolation and temporary control Precision-oriented jaw alignment Surgical-grade stainless steel construction Durable design for professional reusable instrumentation Product Specifications Specification Details Product Name Satinsky Vena Cava Clamp Overall Length 6 1/4″ Jaw Type Cross Serrated Instrument Type Vascular / Vena Cava Clamp Primary Function Vessel manipulation, positioning, and temporary occlusion Intended Application Appropriately sized vascular structures Surgical Specialty Cardiovascular / Vascular Surgery Typical Application Vascular control, isolation, repair, reconstruction, and manipulation Jaw Surface Cross Serrated Material Surgical-grade stainless steel Reusable Yes, for reusable models Sterilization Follow validated manufacturer and facility protocols FAQs 1. What is a Satinsky Vena Cava Clamp used for? It is designed to assist with controlled manipulation, positioning, isolation, and temporary occlusion of appropriately sized vascular structures during selected cardiovascular and vascular procedures. 2. What is the overall length of this Satinsky clamp? The overall length is 6.25 inches (6 1/4″) . 3. What are cross-serrated jaws? Cross-serrated jaws feature intersecting textured serrations on the working surfaces, providing a defined gripping pattern for controlled engagement of the target structure. 4. What is the purpose of serrated jaws? The serrated working surface is intended to support secure positioning of the target structure during controlled clamp application. 5. Can this clamp be used for temporary vascular occlusion? Yes. It is designed to support temporary vascular occlusion when appropriate for the target vessel and surgical technique. 6. Which specialties may use a Satinsky Vena Cava Clamp? It may be incorporated into selected cardiovascular, vascular, and thoracic surgical instrument sets. 7. What material is this Satinsky clamp made from? It is typically manufactured from surgical-grade stainless steel for strength, durability, and corrosion resistance. 8. How should cross-serrated vascular clamps be cleaned? Reusable models should be promptly cleaned according to validated facility procedures, with particular attention to the serrated jaws and hinge. Sterilization should follow the manufacturer’s validated instructions and institutional protocols.