6 inch Bunnell Tendon Stripper 6mm Diameter (Size 4)

The 6 inch Bunnell Tendon Stripper 6mm Diameter (Size 4) is a specialized surgical instrument designed for controlled tendon harvesting, stripping, and preparation. With an overall length of 6 inches and a 6mm diameter working size, this instrument provides a practical combination of reach, control, and working capacity for appropriate tendon procedures. The Bunnell tendon stripper is used to assist with the controlled separation and preparation of tendon tissue during surgical procedures. Its dedicated design allows the instrument to be guided along the tendon according to the surgeon’s technique, helping facilitate consistent tendon preparation while maintaining direct manual control. The 6mm diameter specification identifies the working size of this instrument, while the Size 4 designation provides an additional size reference for instrument selection. These dimensions are useful when organizing tendon harvesting instruments and selecting the appropriate stripper for the intended procedure and anatomical requirements. At 6 inches in length, the instrument is compact enough for controlled handling while providing sufficient working reach for suitable applications. Its manually operated design allows the user to regulate the direction, pressure, and movement of the instrument during tendon preparation. Proper technique and careful handling are essential to avoid unnecessary tissue trauma. The Bunnell Tendon Stripper may be incorporated into appropriate orthopedic, reconstructive, hand, tendon repair, and tendon graft procedures where controlled tendon preparation is required. The exact application and technique should be determined by a qualified surgical professional based on the procedure and patient anatomy. The instrument should be thoroughly cleaned after each use, paying particular attention to the working portion and any areas where tissue or biological material may remain. Inspection should be performed to identify signs of wear, deformation, corrosion, or other damage that could affect proper instrument function. When supplied as a reusable surgical instrument, cleaning, disinfection, and sterilization should be carried out according to the manufacturer’s validated instructions and the healthcare facility’s established instrument-processing protocol. Proper drying and storage can help maintain the instrument’s working condition and extend its service life. The 6″ Bunnell Tendon Stripper 6mm Diameter (Size 4) is a practical addition to professional tendon and orthopedic instrument sets. Its defined 6mm working size, compact 6-inch length, and Bunnell-style design make it suitable for controlled tendon stripping and preparation when selected according to the requirements of the surgical procedure. Key Features Bunnell tendon stripper design 6-inch overall length 6mm diameter working size Size 4 configuration Designed for controlled tendon stripping Supports tendon harvesting and preparation Suitable for appropriate tendon graft procedures Provides direct manual control Compact design for controlled handling Suitable for orthopedic and reconstructive procedures Easy to incorporate into tendon instrument sets Reusable when supplied in a reusable configuration Product Specifications Specification Details Product Name 6″ Bunnell Tendon Stripper 6mm Diameter Instrument Type Tendon Stripper Design Bunnell Length 6 inches Diameter 6mm Size Size 4 Primary Function Tendon stripping, harvesting, and preparation Operation Manual Applications Orthopedic, reconstructive, hand, and tendon procedures Working Action Controlled tendon stripping Reusable Depending on supplied configuration Sterilization According to validated manufacturer instructions Intended Use Professional surgical use FAQs 1. What is the 6″ Bunnell Tendon Stripper used for? It is designed to assist with controlled tendon stripping, harvesting, and preparation during appropriate surgical procedures. 2. What does the 6mm diameter refer to? The 6mm specification refers to the stated working diameter or size of the tendon stripper. 3. What does Size 4 mean? Size 4 is the manufacturer’s or instrument-system size designation for this particular Bunnell tendon stripper. 4. What is the advantage of a 6-inch tendon stripper? The 6-inch length provides a compact working profile with direct manual control for appropriate tendon preparation procedures. 5. Can it be used for tendon graft procedures? It may be used in suitable tendon graft and reconstructive procedures when selected according to the surgical technique and anatomical requirements. 6. Is the Bunnell Tendon Stripper reusable? It may be reusable when supplied as a reusable surgical instrument. Always follow the manufacturer’s validated cleaning and sterilization instructions. 7. How should the tendon stripper be maintained? It should be thoroughly cleaned after use, inspected for damage or wear, dried appropriately, and processed according to the manufacturer’s instructions. 8. Who should use this instrument? It is intended for appropriately trained healthcare professionals using it as part of suitable surgical procedures.