7 1/2″ Renal Artery Clamp 2 1/2″ Jaw

The 7 1/2″ Renal Artery Clamp 2 1/2″ Jaw is a specialized vascular surgical instrument designed to assist with controlled manipulation, positioning, isolation, and temporary occlusion of appropriately sized vascular structures. With an overall length of 7.5 inches and a 2.5-inch jaw , this renal artery clamp provides extended working reach and a substantial working profile for selected vascular and renal procedures. Renal artery clamps are used when controlled management of renal and adjacent vascular structures is required during surgery. This specialized instrument can assist with temporary vessel occlusion, positioning, isolation, and manipulation when its working dimensions are appropriate for the target anatomy. The exact clinical application should always be determined by a qualified surgeon based on the operative requirements and patient anatomy. The 2.5-inch jaw provides a defined working surface for engaging the intended vascular structure. A longer jaw can provide broader contact along the selected vessel, but proper instrument selection remains essential to ensure that the working end is appropriate for the size, location, and characteristics of the target anatomy. At 7.5 inches overall length , the clamp offers useful reach for operative fields where additional distance between the surgeon’s hand and the target structure is beneficial. This extended length can support controlled handling during selected renal, vascular, and abdominal surgical procedures. The Renal Artery Clamp may be incorporated into professional vascular, cardiovascular, urologic, renal, and abdominal surgical instrument sets , depending on the specific design and intended application. Potential uses may include temporary vascular occlusion, vessel isolation, positioning, manipulation, and support during selected reconstructive or vascular procedures. Proper selection is particularly important when working with renal arteries and other vascular structures. Vessel diameter, anatomical position, tissue characteristics, operative exposure, and surgical technique should be considered before selecting the instrument. Exact jaw dimensions and working-end specifications should be verified against the manufacturer’s technical documentation. Controlled application is essential when handling vascular tissue. The working jaws should be positioned accurately before application, and only the force necessary for the intended clinical purpose should be used. Excessive compression, twisting, bending, or inappropriate leverage should be avoided to help minimize potential vascular tissue trauma and preserve instrument integrity. The extended 7.5-inch shaft can provide practical reach while allowing the surgeon to maintain controlled hand positioning. The combination of overall length and 2.5-inch jaw length provides a useful configuration for selected operative fields where access to vascular structures requires a longer instrument. The instrument is typically manufactured from surgical-grade stainless steel , providing mechanical strength, durability, and corrosion resistance suitable for professional reusable surgical instrumentation. Precision manufacturing supports reliable jaw alignment and consistent mechanical performance. A smooth finish also facilitates routine cleaning, inspection, and maintenance. After use, reusable instruments should be promptly cleaned and decontaminated according to established healthcare-facility procedures. Particular attention should be given to the 2.5-inch jaws, hinge, shaft, and adjoining surfaces , where blood and biological residue may accumulate. The clamp should be inspected for corrosion, wear, deformation, surface damage, and proper alignment before sterilization. Sterilization should be performed using a validated process compatible with the manufacturer’s instructions and institutional infection-control requirements. Proper handling and storage help preserve the jaw alignment and mechanical performance of the instrument. The 7 1/2″ Renal Artery Clamp 2 1/2″ Jaw combines an extended 7.5-inch overall length with a 2.5-inch working jaw for controlled renal and vascular handling. Its specialized configuration, useful reach, and durable construction make it a practical addition to professional vascular and renal surgical instrument sets. Key Features Specialized renal artery clamp design 7.5-inch overall length 2.5-inch jaw length Designed for controlled vascular occlusion Facilitates vessel positioning and manipulation Supports vessel isolation during selected procedures Provides extended working reach Defined working area for appropriately sized vessels Suitable for selected renal and vascular procedures Surgical-grade stainless steel construction Durable professional surgical design Suitable for reusable instrument sets Product Specifications Specification Details Product Name Renal Artery Clamp Overall Length 7 1/2″ Jaw Length 2 1/2″ Instrument Type Renal / Vascular Clamp Primary Function Vessel manipulation, positioning, isolation, and temporary occlusion Intended Application Appropriately sized renal and vascular structures Surgical Specialty Vascular / Renal / Urologic Surgery Typical Application Renal vessel control, isolation, positioning, and manipulation Working Profile 2 1/2″ jaw Material Surgical-grade stainless steel Reusable Yes, for reusable models Sterilization Follow validated manufacturer and facility protocols FAQs 1. What is the Renal Artery Clamp used for? It is designed to assist with controlled manipulation, positioning, isolation, and temporary occlusion of appropriately sized renal and vascular structures during selected surgical procedures. 2. What is the overall length of this renal artery clamp? The overall length is 7.5 inches (7 1/2″) . 3. What is the jaw length? The jaw length is 2.5 inches (2 1/2″) according to the product specification. 4. Why is a longer clamp useful in renal surgery? The extended length can provide useful working reach when access to renal or vascular structures requires additional distance from the operative site. 5. Can this clamp be used for temporary vascular occlusion? Yes. It can support temporary vessel occlusion when appropriately selected for the target anatomy and surgical technique. 6. Which specialties may use this instrument? It may be incorporated into selected vascular, renal, urologic, and abdominal surgical instrument sets. 7. What material is the Renal Artery Clamp made from? It is typically manufactured from surgical-grade stainless steel for strength, durability, and corrosion resistance. 8. How should this clamp be sterilized? Reusable models should be cleaned, inspected, and sterilized using a validated process according to the manufacturer’s instructions and healthcare-facility sterilization protocols.