7 3/4″ Cooley Partial Occlusion Clamp 2.3cm Depth, 7mm Width

The 7 3/4″ Cooley Partial Occlusion Clamp 2.3cm Depth, 7mm Width is a specialized vascular partial occlusion clamp designed for controlled temporary occlusion of an appropriate portion of a vascular structure during selected cardiovascular and vascular surgical procedures. Its 7 3/4-inch overall length , 2.3cm depth , and 7mm width provide a defined working configuration for precise vascular handling. Partial occlusion clamps are specialized instruments used when the surgical procedure requires controlled occlusion of only a portion of a suitable vessel rather than complete circumferential clamping. This configuration can provide the surgeon with access to an appropriate section of the vascular structure while maintaining controlled vascular management. The exact application, vessel selection, placement, pressure, and duration should always be determined by the operating surgeon according to patient anatomy and established surgical technique. The 2.3cm depth is an important dimensional specification of this Cooley clamp. It provides a reference for identifying the working configuration and selecting an appropriate instrument for the intended operative anatomy. Correct instrument dimensions are particularly important in vascular surgery, where the working area and vessel characteristics must be carefully considered. The 7mm width further defines the clamp’s working configuration. This dimension allows surgical teams to distinguish this model from other Cooley partial occlusion clamps and organize instruments according to specific procedural requirements. The stated dimensions should always be considered alongside vessel size, anatomical location, surgical access, and the surgeon’s preferred technique. The 7 3/4-inch overall length provides practical reach within suitable cardiovascular operative fields. The extended length can allow the working end to access vascular structures while keeping the handle at a manageable distance from the immediate surgical site. Instrument length should be selected according to the operative approach and depth of the target anatomy. The Cooley Partial Occlusion Clamp can be incorporated into cardiovascular surgical instrument sets, vascular reconstruction trays, cardiac surgery collections, partial occlusion clamp systems, and major vascular procedure sets . It can complement vascular forceps, vascular scissors, vessel dilators, needle holders, bulldog clamps, aneurysm clamps, and other cardiovascular surgical instruments. Controlled application is essential when working with vascular structures. Excessive pressure, inappropriate positioning, or prolonged clamping may potentially cause vascular or surrounding tissue injury. This instrument should therefore only be applied to suitable anatomical structures by trained surgical professionals using controlled force and established clinical protocols. The defined 2.3cm depth and 7mm width provide a specialized option for surgical facilities maintaining several vascular clamp configurations. Multiple sizes allow the operating team to select an appropriate clamp based on the anatomical and procedural requirements. Before every procedure, the Cooley Partial Occlusion Clamp should be carefully inspected for proper alignment, smooth mechanical operation, structural integrity, and condition of the working components. The occluding surfaces should remain properly aligned and free from deformation, excessive wear, corrosion, or visible damage. For reusable configurations, the instrument should be cleaned and decontaminated promptly following each procedure according to validated healthcare-facility instrument-processing procedures. Particular attention should be given to the working surfaces, hinge, and other mechanical areas where biological material may accumulate. After cleaning, the clamp should be inspected again for proper mechanical function and structural condition. Sterilization should be performed using a validated process compatible with the instrument and consistent with applicable manufacturer instructions and institutional protocols. Proper cleaning, sterilization, handling, and storage help preserve instrument integrity and service life. For hospitals, cardiovascular surgeons, vascular surgeons, cardiac surgical teams, operating rooms, surgical centers, and medical instrument suppliers, the 7 3/4″ Cooley Partial Occlusion Clamp 2.3cm Depth, 7mm Width provides a specialized solution for controlled partial vascular occlusion. Its defined overall length, depth, and width make it a practical addition to professional cardiovascular and vascular surgical instrument collections. Key Features Cooley Partial Occlusion Clamp design 7 3/4″ overall length 2.3cm specified depth 7mm specified width Designed for controlled partial vascular occlusion Suitable for appropriate cardiovascular procedures Supports precise vascular positioning Provides practical reach for cardiovascular operative fields Suitable for vascular reconstruction instrument sets Useful for specialized partial occlusion procedures Designed for professional surgical handling Requires proper cleaning, inspection, sterilization, and storage Product Specifications Specification Details Product Name Cooley Partial Occlusion Clamp Instrument Type Partial Vascular Occlusion Clamp Overall Length 7 3/4″ Depth 2.3cm Width 7mm Primary Application Cardiovascular Surgery Secondary Application Vascular Surgery Intended Use Controlled Partial Vascular Occlusion Design Partial Occlusion Clamp Operation Manual Construction Surgical Instrument Sterilization According to validated facility protocol and manufacturer guidance Intended Users Trained Surgical Professionals Clinical Environment Hospitals, Operating Rooms & Surgical Centers FAQs 1. What is a Cooley Partial Occlusion Clamp used for? A Cooley Partial Occlusion Clamp is designed for controlled temporary occlusion of a selected portion of a suitable vascular structure during appropriate cardiovascular and vascular procedures. 2. What is the overall length of this Cooley Clamp? This model has a specified 7 3/4-inch overall length , providing practical reach for appropriate cardiovascular surgical applications. 3. What are the dimensions of this Partial Occlusion Clamp? This model has a specified 2.3cm depth and 7mm width . 4. What does partial occlusion mean? Partial occlusion refers to controlled clamping of a portion of an appropriate vascular structure rather than completely occluding the vessel around its entire circumference. 5. Is this Cooley clamp suitable for vascular surgery? It is designed for appropriate cardiovascular and vascular applications requiring controlled partial occlusion, subject to professional surgical judgment and established technique. 6. How should the Cooley Partial Occlusion Clamp be sterilized? For reusable configurations, it should be thoroughly cleaned, decontaminated, inspected, and sterilized using a validated process consistent with manufacturer guidance and healthcare-facility protocols. 7. How should this vascular clamp be maintained? The working surfaces, hinge, alignment, and overall structure should be inspected after cleaning and before reuse for proper mechanical function, deformation, wear, or visible damage.