8 1/2″ Glover Clamp Curved 2″ Cooley Jaw

The 8 1/2″ Glover Clamp Curved 2″ Cooley Jaw is a specialized cardiovascular and vascular surgical instrument designed to assist with controlled manipulation, positioning, isolation, and temporary occlusion of appropriately sized blood vessels. Measuring 8 1/2 inches overall, this clamp features a curved configuration with a 2-inch Cooley-style jaw , providing a specialized working profile for selected vascular procedures. The Glover Clamp is intended for vascular applications where controlled vessel management and practical access are important. Its curved configuration can assist with approaching selected vascular structures from an offset trajectory, while the Cooley jaw provides a defined working surface for controlled engagement. The exact clinical application should always be determined by a qualified vascular or cardiovascular surgeon. The curved profile creates an offset between the instrument shaft and working end. This can facilitate access when a straight clamp may provide a less convenient approach because of anatomical positioning, surrounding structures, or limited operative exposure. The curved design may also provide useful hand clearance around the surgical field. The 2-inch Cooley jaw provides a defined working surface for engaging appropriately sized vascular structures. Its jaw dimensions should be matched carefully to the target vessel and intended surgical technique. Exact jaw geometry and tooth or serration characteristics should be verified against the manufacturer’s specifications before clinical use. At 8 1/2 inches overall length , the instrument provides extended working reach while maintaining practical handling. This length may be advantageous in cardiovascular, thoracic, and peripheral vascular operative fields where additional access distance is required. The Glover Clamp may be incorporated into professional vascular, cardiovascular, thoracic, and peripheral vascular surgical instrument sets . Potential applications include temporary vascular occlusion, vessel positioning, isolation, manipulation, and selected vascular repair or reconstructive procedures. Proper instrument selection is essential when working with vascular tissue. Vessel diameter, anatomical location, tissue characteristics, operative exposure, and procedural requirements should be considered before selecting the clamp. The 2-inch Cooley jaw should be appropriate for the intended target structure. Controlled application is important to help minimize potential vascular tissue trauma. The Cooley jaw should be positioned accurately before application, and only the force necessary for the intended clinical purpose should be used. Excessive compression, twisting, bending, or inappropriate leverage should be avoided. The combination of the curved Glover configuration and 2-inch Cooley jaw provides a specialized working geometry for selected vascular applications. The curved trajectory can facilitate access, while the Cooley jaw offers a defined working surface for controlled vessel handling. The instrument is typically manufactured from surgical-grade stainless steel , providing strength, durability, and corrosion resistance suitable for professional reusable surgical instrumentation. Precision manufacturing supports reliable jaw alignment and consistent mechanical performance. A smooth surface finish also facilitates routine cleaning, inspection, and maintenance. After use, reusable instruments should be promptly cleaned and decontaminated according to established healthcare-facility procedures. Particular attention should be given to the 2-inch Cooley jaw, curved working end, hinge, and adjoining surfaces , where blood and biological residue may accumulate. The clamp should be inspected for wear, deformation, corrosion, surface damage, and proper jaw alignment before sterilization. Sterilization should be performed using a validated process compatible with the manufacturer’s instructions and institutional infection-control requirements. Proper handling and storage help preserve the curved configuration, jaw dimensions, and mechanical performance. The 8 1/2″ Glover Clamp Curved 2″ Cooley Jaw combines an extended 8.5-inch length with a curved configuration and 2-inch Cooley jaw for controlled vascular handling. Its offset working trajectory, defined jaw profile, and durable construction make it a practical addition to professional cardiovascular and vascular surgical instrument sets. Key Features Glover Clamp design 8 1/2-inch overall length Curved configuration 2-inch Cooley jaw Specialized offset working trajectory Defined vascular working surface Supports controlled temporary vascular occlusion Facilitates vessel positioning and isolation Useful for controlled vascular manipulation Suitable for selected cardiovascular and vascular procedures Surgical-grade stainless steel construction Durable professional reusable design Product Specifications Specification Details Product Name Glover Clamp Overall Length 8 1/2″ Configuration Curved Jaw Type Cooley Jaw Jaw Length 2″ Instrument Type Vascular Clamp Primary Function Vessel manipulation, positioning, isolation, and temporary occlusion Intended Application Appropriately sized vascular structures Surgical Specialty Vascular / Cardiovascular Surgery Typical Application Vessel control, positioning, isolation, and manipulation Working Profile Curved with 2″ Cooley jaw Material Surgical-grade stainless steel Reusable Yes, for reusable models Sterilization Follow validated manufacturer and facility protocols FAQs 1. What is the Glover Clamp used for? It is designed to assist with controlled manipulation, positioning, isolation, and temporary occlusion of appropriately sized vascular structures during selected vascular procedures. 2. What is the overall length of this clamp? The overall length is 8 1/2 inches (8.5″) . 3. What type of jaw does this Glover Clamp have? This model features a 2-inch Cooley jaw . 4. What does the curved configuration provide? The curved profile provides an offset working trajectory that can facilitate access to selected vascular structures. 5. What is the benefit of a 2-inch Cooley jaw? The 2-inch Cooley jaw provides a defined working surface for controlled engagement of appropriately sized vascular structures. 6. Can this clamp be used for temporary vascular occlusion? Yes. It can support temporary vascular occlusion when appropriately selected for the target vessel and surgical technique. 7. What material is the Glover Clamp typically made from? It is typically manufactured from surgical-grade stainless steel for strength, durability, and corrosion resistance. 8. How should this vascular clamp be sterilized? Reusable models should be cleaned, inspected, and sterilized using a validated process according to the manufacturer’s instructions and healthcare-facility sterilization protocols.