8 1/4″ Beck Aorta Clamp Acutely Angled 6.7 cm Jaw

The 8 1/4″ Beck Aorta Clamp Acutely Angled 6.7 cm Jaw is a specialized cardiovascular and vascular surgical instrument designed to assist with controlled manipulation, positioning, isolation, and temporary occlusion of appropriately sized aortic structures. Measuring 8 1/4 inches overall and featuring an acutely angled working profile with a 6.7 cm jaw , this clamp provides extended reach and a specialized trajectory for selected cardiovascular procedures. The Beck Aorta Clamp is designed for procedures in which controlled management of the aorta or appropriately sized major vascular structures is required. Its specialized configuration can assist with vessel positioning, isolation, manipulation, and temporary occlusion according to the requirements of the procedure. Clinical use should always be determined by a qualified cardiovascular surgeon based on patient anatomy and operative needs. The acutely angled design creates a pronounced offset between the instrument shaft and working end. This geometry can facilitate access to selected portions of the aorta when a straight approach is less convenient because of anatomical positioning, surrounding structures, or limited operative exposure. The angled trajectory may also provide useful clearance for the surgeon’s hand and improve positioning around the operative field. The 6.7 cm jaw length provides an extended working surface for engaging appropriately sized vascular structures. The longer jaw profile can provide broad contact along the selected vessel, depending on the intended surgical technique and anatomy. Exact jaw geometry and dimensions should be verified against the manufacturer’s technical specifications before clinical use. At 8 1/4 inches overall length , the instrument provides useful working reach while retaining practical handling characteristics. This extended length can be advantageous in cardiovascular and thoracic operative fields where the target vascular structure is deeper or requires an offset approach. The Beck Aorta Clamp may be incorporated into professional cardiovascular, vascular, thoracic, and aortic surgery instrument sets . Potential applications include temporary aortic occlusion, vessel positioning, isolation, manipulation, and selected cardiovascular reconstructive procedures. Proper instrument selection is essential when working with the aorta and other major vessels. Vessel diameter, anatomical location, tissue characteristics, operative exposure, and procedural requirements should be carefully considered before selecting the clamp. The 6.7 cm jaw dimensions and acute angulation should be appropriate for the intended application. Controlled application is particularly important during aortic surgery. The working jaws should be accurately positioned before application, and only the force necessary for the intended clinical purpose should be used. Excessive compression, twisting, bending, or inappropriate leverage should be avoided to help minimize potential vascular tissue trauma. The combination of the acute angle and 6.7 cm jaw provides a specialized working geometry for selected aortic applications. The angled trajectory can facilitate access around anatomical structures, while the extended jaw provides a substantial working surface for controlled vessel engagement. The instrument is typically manufactured from surgical-grade stainless steel , providing mechanical strength, durability, and corrosion resistance suitable for professional reusable surgical instrumentation. Precision manufacturing supports reliable jaw alignment and consistent mechanical performance. A smooth finish also facilitates routine cleaning, inspection, and maintenance. After use, reusable instruments should be promptly cleaned and decontaminated according to established healthcare-facility procedures. Particular attention should be given to the 6.7 cm jaws, acute angled working end, hinge, and adjoining surfaces , where blood and biological residue may accumulate. The clamp should be inspected for wear, deformation, corrosion, surface damage, and proper jaw alignment before sterilization. Sterilization should be performed using a validated process compatible with the manufacturer’s instructions and institutional infection-control requirements. Proper handling and storage help preserve the acute working angle, jaw dimensions, and mechanical performance. The 8 1/4″ Beck Aorta Clamp Acutely Angled 6.7 cm Jaw combines an extended 8.25-inch length, acute angled configuration, and 6.7 cm jaw for controlled aortic and major vascular handling. Its specialized geometry, extended working surface, and durable construction make it a practical addition to professional cardiovascular and vascular surgical instrument sets. Key Features Beck Aorta Clamp design 8 1/4-inch overall length Acutely angled working configuration 6.7 cm jaw length Extended working surface Specialized offset approach Designed for selected aortic procedures Supports controlled temporary vascular occlusion Facilitates vessel positioning and isolation Useful for controlled aortic manipulation Surgical-grade stainless steel construction Durable professional reusable design Product Specifications Specification Details Product Name Beck Aorta Clamp Overall Length 8 1/4″ Jaw Length 6.7 cm Configuration Acutely Angled Instrument Type Aortic / Cardiovascular Clamp Primary Function Aortic manipulation, positioning, isolation, and temporary occlusion Intended Application Appropriately sized aortic and major vascular structures Surgical Specialty Cardiovascular / Vascular Surgery Typical Application Aortic vessel control, positioning, and selected occlusion procedures Working Profile Acutely angled with 6.7 cm jaw Material Surgical-grade stainless steel Reusable Yes, for reusable models Sterilization Follow validated manufacturer and facility protocols FAQs 1. What is the Beck Aorta Clamp used for? It is designed to assist with controlled manipulation, positioning, isolation, and temporary occlusion of appropriately sized aortic or major vascular structures during selected cardiovascular procedures. 2. What is the overall length of this clamp? The overall length is 8 1/4 inches (8.25″) . 3. What is the jaw length? The specified jaw length is 6.7 cm . 4. What does the acutely angled design provide? The acute angle provides a pronounced offset working trajectory that can facilitate access to selected aortic structures. 5. Why is a longer jaw useful in aortic surgery? A longer jaw provides an extended working surface for controlled engagement of appropriately sized vascular structures. 6. Can this clamp be used for temporary aortic occlusion? It can support temporary vascular occlusion when appropriately selected for the target anatomy and surgical technique. 7. What material is the Beck Aorta Clamp typically made from? It is typically manufactured from surgical-grade stainless steel for strength, durability, and corrosion resistance. 8. How should this aortic clamp be sterilized? Reusable models should be cleaned, inspected, and sterilized using a validated process according to the manufacturer’s instructions and healthcare-facility sterilization protocols.