8 1/4″ Debakey Multi Purpose Clamp Ang 60° 50mm Jaw

The 8 1/4″ Debakey Multi Purpose Clamp Ang 60° 50mm Jaw is a specialized cardiovascular and vascular surgical instrument designed to assist with controlled manipulation, positioning, isolation, and temporary occlusion of appropriately sized vascular structures. With an overall length of 8 1/4 inches , a 60° angled configuration , and a 50 mm jaw length , this clamp provides a combination of extended reach and specialized working geometry for selected vascular procedures. The DeBakey Multi-Purpose Clamp is intended for applications where controlled vessel management is required. Its versatile configuration can assist with vessel positioning, isolation, manipulation, and temporary occlusion depending on the target anatomy and surgical technique. Clinical use should always be determined by a qualified vascular or cardiovascular surgeon. The 60° angled design creates a pronounced offset between the instrument shaft and working end. This can facilitate access to vascular structures from an angled trajectory when a straight approach is less convenient because of anatomical positioning, surrounding tissues, or restricted operative exposure. The angle may also provide useful hand clearance around the surgical field. The 50 mm jaw length provides an extended working surface for engaging appropriately sized vascular structures. A longer jaw can provide useful contact along a selected portion of a vessel, depending on the intended application. Exact jaw dimensions and working-end characteristics should be verified against the manufacturer’s technical specifications before clinical use. At 8 1/4 inches overall length , this instrument provides extended reach while maintaining practical handling. The additional length can be useful when access to deeper or less directly exposed vascular structures is required. The DeBakey Multi-Purpose Clamp may be incorporated into professional cardiovascular, vascular, thoracic, and peripheral vascular surgical instrument sets . Potential applications include temporary vascular occlusion, vessel isolation, positioning, manipulation, and selected vascular repair or reconstructive procedures. Proper instrument selection is essential when working with vascular anatomy. Vessel diameter, anatomical location, tissue characteristics, operative exposure, and procedural requirements should be considered before selecting the clamp. The 50 mm jaw length and 60° angulation should be appropriate for the target anatomy and intended technique. Controlled application is important to help minimize potential vascular tissue trauma. The jaws should be positioned accurately before application, and only the force necessary for the intended clinical purpose should be used. Excessive compression, twisting, bending, or inappropriate leverage should be avoided. The combination of the 60° angled profile and 50 mm jaws provides a specialized working geometry for selected vascular applications. The angled trajectory can facilitate access, while the extended jaws provide a substantial working surface for controlled vessel engagement. The instrument is typically manufactured from surgical-grade stainless steel , providing mechanical strength, durability, and corrosion resistance suitable for professional reusable surgical instrumentation. Precision manufacturing supports consistent jaw alignment and reliable mechanical operation. A smooth surface finish also facilitates cleaning, inspection, and maintenance. After use, reusable instruments should be promptly cleaned and decontaminated according to established healthcare-facility procedures. Particular attention should be given to the 50 mm jaws, angled working end, hinge, and adjoining surfaces , where blood and biological residue may accumulate. The clamp should be inspected for wear, deformation, corrosion, surface damage, and proper jaw alignment before sterilization. Sterilization should be performed using a validated process compatible with the manufacturer’s instructions and institutional infection-control requirements. Proper handling and storage help preserve the 60° angled geometry, jaw dimensions, and mechanical performance. The 8 1/4″ DeBakey Multi-Purpose Clamp Angled 60° 50mm Jaw combines an extended 8.25-inch length, 60° angled configuration, and 50 mm jaw length for controlled vascular handling. Its specialized geometry, extended working surface, and durable construction make it a useful addition to professional cardiovascular and vascular surgical instrument sets. Key Features DeBakey Multi-Purpose Clamp design 8 1/4-inch overall length 60° angled configuration 50 mm jaw length Extended working surface Offset working trajectory Supports controlled temporary vascular occlusion Facilitates vessel positioning and isolation Useful for controlled vascular manipulation Suitable for selected cardiovascular and vascular procedures Surgical-grade stainless steel construction Durable professional reusable design Product Specifications Specification Details Product Name DeBakey Multi-Purpose Clamp Overall Length 8 1/4″ Angulation 60° Jaw Length 50 mm Instrument Type Multi-Purpose Vascular Clamp Primary Function Vessel manipulation, positioning, isolation, and temporary occlusion Intended Application Appropriately sized vascular structures Surgical Specialty Cardiovascular / Vascular Surgery Typical Application Vessel control, positioning, isolation, and manipulation Working Profile 60° angled with 50 mm jaws Material Surgical-grade stainless steel Reusable Yes, for reusable models Sterilization Follow validated manufacturer and facility protocols FAQs 1. What is the DeBakey Multi-Purpose Clamp used for? It is designed to assist with controlled manipulation, positioning, isolation, and temporary occlusion of appropriately sized vascular structures during selected vascular procedures. 2. What is the overall length of this clamp? The overall length is 8 1/4 inches (8.25″) . 3. What does the 60° angled design provide? The 60° angle provides a pronounced offset working trajectory that can facilitate access to selected vascular structures. 4. How long are the jaws? The specified jaw length is 50 mm . 5. What are the benefits of a 50 mm jaw? The 50 mm jaw provides an extended working surface for controlled engagement of appropriately sized vascular structures. 6. Can this clamp be used for temporary vascular occlusion? Yes. It can support temporary vascular occlusion when appropriately selected for the target vessel and surgical technique. 7. What material is this DeBakey clamp made from? It is typically manufactured from surgical-grade stainless steel for strength, durability, and corrosion resistance. 8. How should this vascular clamp be sterilized? Reusable models should be cleaned, inspected, and sterilized using a validated process according to the manufacturer’s instructions and healthcare-facility sterilization protocols.