8 3/4″ Glover Coarctation Clamp 5.5cm Straight

The 8 3/4″ Glover Coarctation Clamp 5.5cm Straight is a specialized cardiovascular and vascular surgical instrument designed for controlled occlusion, manipulation, and positioning of major blood vessels. Its Glover-style configuration and straight 5.5 cm working end make it suitable for surgical situations where a direct approach to the target vascular structure is preferred. The instrument is particularly relevant to specialized cardiovascular, vascular, and thoracic surgical instrument sets. With an overall length of 8 3/4 inches , this Glover coarctation clamp provides useful working reach while maintaining practical control during surgery. The extended length can help the surgeon access vascular structures within deeper operative fields while keeping the handles positioned outside the immediate surgical site. This combination of reach and maneuverability is useful when controlled vascular clamping is required. The instrument features a 5.5 cm straight working end , providing a defined contact surface for engaging the intended vessel. Unlike an angled vascular clamp, the straight configuration is designed for a more direct approach to the target anatomy. This can be advantageous when the operative field and vessel orientation allow the surgeon to position the clamp along a relatively linear path. A Glover Coarctation Clamp may be incorporated into specialized cardiovascular and thoracic surgical instrumentation for procedures involving major vascular structures. The term coarctation clamp is commonly associated with vascular procedures involving the aorta, including surgical treatment of aortic coarctation. Depending on the exact instrument design and operative technique, vascular clamps can support temporary occlusion, vessel control, manipulation, and positioning. Final instrument selection should always be determined by the operating surgeon according to the patient’s anatomy and procedural requirements. The straight working end is designed to provide predictable positioning and controlled contact with the target structure. Accurate jaw alignment and smooth mechanical operation are important characteristics for vascular clamps because they allow the surgical team to apply the instrument in a controlled manner. The instrument should be handled carefully and used only for its intended surgical purpose. Professional reusable surgical clamps are commonly manufactured from surgical-grade stainless steel , selected for its mechanical strength, durability, and corrosion resistance. High-quality construction can support repeated use and instrument processing when appropriate maintenance procedures are followed. The surface should remain free from corrosion, pitting, and damage, while the jaws should maintain proper alignment throughout the instrument’s service life. Proper cleaning and sterilization are essential for maintaining the 8 3/4″ Glover Coarctation Clamp . After each surgical procedure, the instrument should be cleaned promptly according to the manufacturer’s validated instructions and the healthcare facility’s approved reprocessing protocol. The working end, hinge, and other areas where biological material may accumulate should be thoroughly cleaned. Following cleaning, the clamp should be rinsed, dried, inspected, and sterilized using an appropriate validated method. Before use, surgical personnel should inspect the clamp for proper jaw alignment, smooth opening and closing, corrosion, surface damage, and other signs of mechanical deterioration. Instruments that do not function correctly should be removed from service and evaluated according to institutional procedures. The 8 3/4″ Glover Coarctation Clamp 5.5 cm Straight provides a specialized combination of extended length and straight working geometry for controlled vascular handling. It is a practical choice for hospitals, cardiovascular centers, and surgical facilities seeking professional Glover clamps, coarctation clamps, vascular clamps, and cardiovascular surgical instruments . Key Features 8 3/4-inch overall length provides useful surgical reach. 5.5 cm straight working end supports direct vascular access. Glover-style configuration designed for specialized vascular procedures. Suitable for controlled clamping of major vascular structures. Straight design facilitates direct positioning around the target vessel. Applicable to selected cardiovascular, vascular, and thoracic procedures. Useful for temporary vascular occlusion and vessel manipulation. Surgical-grade stainless steel construction supports durability. Designed for controlled mechanical operation and precise handling. Suitable for cardiovascular and vascular surgical instrument sets. Requires inspection of jaws and mechanical function before use. Reprocessing should follow validated manufacturer and facility protocols. Product Specifications Specification Details Product Name Glover Coarctation Clamp Instrument Type Vascular / Coarctation Clamp Overall Length 8 3/4 inches Working End Straight Working End Length 5.5 cm Design Glover Type Primary Function Vascular clamping and manipulation Applications Cardiovascular, vascular, thoracic surgery Material Surgical-grade stainless steel Reusable Yes, when supplied as a reusable instrument Sterilization Follow manufacturer-validated instructions Intended Users Trained surgical professionals FAQs 1. What is the 8 3/4″ Glover Coarctation Clamp used for? It is designed for controlled clamping, manipulation, and positioning of major vascular structures during appropriate cardiovascular, vascular, and thoracic surgical procedures. 2. What is the working end length of this Glover clamp? The working end measures 5.5 cm and features a straight configuration for direct access to the intended vascular structure. 3. What does the straight design of this clamp provide? The straight working end allows a more direct approach to the target vessel and may be preferred when the anatomy and operative field permit linear instrument positioning. 4. How long is the Glover Coarctation Clamp? The overall instrument length is 8 3/4 inches , providing useful reach for vascular procedures. 5. Can this clamp be used during aortic coarctation surgery? Glover coarctation clamps are associated with vascular procedures involving the aorta, including selected coarctation procedures. Specific instrument selection should be based on the surgical technique and surgeon’s judgment. 6. What material is used to manufacture this vascular clamp? Reusable professional vascular clamps of this type are commonly made from surgical-grade stainless steel for strength, durability, and corrosion resistance. 7. How should the Glover Coarctation Clamp be maintained? The clamp should be promptly cleaned, thoroughly rinsed and dried, inspected for damage and jaw alignment, and sterilized according to the manufacturer’s validated instructions and the facility’s approved reprocessing protocol.