9 1/2″ Glover Clamp Curved Long

The 9 1/2″ Glover Clamp Curved Long is a specialized vascular surgical instrument designed for controlled clamping, temporary occlusion, and manipulation of blood vessels during appropriate cardiovascular and vascular procedures. Its combination of an extended 9 1/2-inch length and curved long-jaw configuration provides a specialized working geometry for accessing vascular structures while maintaining controlled instrument handling. The extended length of this Glover clamp provides useful reach within the operative field. At 9 1/2 inches , the instrument can help surgeons access vascular structures located deeper within the surgical site while keeping the handles at a practical distance from the immediate operative area. This can be advantageous during procedures where additional reach is needed without sacrificing maneuverability. The curved working end is designed to provide an angled approach to the target vascular structure. Curved vascular clamps can facilitate positioning around or alongside anatomical structures, particularly where a straight instrument may have limited access. The curvature can help the surgeon navigate the working end through a restricted field while maintaining controlled placement of the jaws. The long jaw configuration provides an extended contact area for engaging the intended vessel. This can be useful when a broader working surface is required for controlled vascular manipulation. Jaw dimensions and configuration should always be selected according to the vessel anatomy, procedural requirements, and surgeon preference. Glover-style clamps are specialized instruments used in professional vascular and cardiovascular surgery . Depending on the specific configuration, a clamp of this type may support temporary vessel occlusion, vascular control, manipulation, or positioning. It can be included in specialized cardiovascular, vascular, and thoracic surgical instrument sets for appropriately indicated procedures. The curved long-jaw profile can provide useful clearance around surrounding tissues and other surgical instruments. This may help optimize the working angle when multiple instruments are present in the operative field. The extended length also provides additional separation between the surgeon’s hand and the working site, which can support controlled handling during procedures requiring precise vascular positioning. Professional reusable vascular clamps are commonly manufactured from surgical-grade stainless steel , selected for mechanical strength, durability, and corrosion resistance. Proper manufacturing and maintenance help preserve the clamp’s curved geometry, jaw alignment, and mechanical function. The instrument should be handled carefully to prevent unintended bending or deformation of the working end. Following use, the 9 1/2″ Glover Clamp should be cleaned promptly according to the manufacturer’s validated instructions and the healthcare facility’s approved instrument-reprocessing protocol. Blood and tissue residue should be removed thoroughly from the jaws, curved working end, hinge, and other accessible surfaces. The instrument should then be rinsed, dried, inspected, and sterilized using a validated process compatible with the instrument. Before each subsequent use, trained personnel should inspect the clamp for jaw alignment, smooth opening and closing, corrosion, surface damage, and deformation of the curved working end . Any instrument showing impaired mechanical function or structural damage should be removed from service and evaluated according to institutional procedures. The 9 1/2″ Glover Clamp Curved Long provides a practical combination of extended reach and curved long-jaw geometry for specialized vascular applications. It is a useful addition to professional Glover vascular clamps, cardiovascular surgical instruments, vascular surgery clamps, and thoracic surgical instrument sets where controlled vessel handling and specialized access are required. Key Features 9 1/2-inch overall length provides extended surgical reach. Curved working end facilitates specialized vascular access. Long jaw configuration provides an extended working contact area. Glover-style design for specialized vascular applications. Designed for controlled clamping and manipulation of blood vessels. Supports temporary vascular occlusion when clinically indicated. Curved profile can assist positioning around adjacent anatomy. Suitable for selected cardiovascular, vascular, and thoracic procedures. Surgical-grade stainless steel construction supports durability. Designed for controlled mechanical operation and precise handling. Requires inspection for jaw alignment and working-end deformation. Reprocessing should follow validated manufacturer and facility protocols. Product Specifications Specification Details Product Name Glover Clamp Instrument Type Vascular Clamp Overall Length 9 1/2 inches Working End Curved Jaw Configuration Long Design Glover Type Primary Function Vascular clamping and manipulation Applications Cardiovascular, vascular, thoracic surgery Working Reach Extended Material Surgical-grade stainless steel Reusable Yes, when supplied as a reusable instrument Sterilization Follow manufacturer-validated instructions Intended Users Trained surgical professionals FAQs 1. What is the 9 1/2″ Glover Clamp used for? The Glover Clamp is designed for controlled clamping, temporary occlusion, manipulation, and positioning of vascular structures during appropriate vascular and cardiovascular procedures. 2. What is the benefit of the curved design? The curved working end can facilitate access around adjacent anatomical structures and provide a specialized approach to the target vessel. 3. What does the long configuration mean? The long configuration indicates an extended working jaw profile, providing a larger contact area for appropriate vascular clamping and manipulation. 4. How long is this Glover vascular clamp? The overall length is 9 1/2 inches , providing extended reach for procedures involving deeper or restricted operative fields. 5. Is this clamp suitable for cardiovascular surgery? Yes. It is specialized vascular instrumentation that may be used in selected cardiovascular and vascular procedures according to the surgeon’s technique and instrument selection. 6. What material is the Glover Clamp made from? Professional reusable vascular clamps of this type are commonly manufactured from surgical-grade stainless steel for strength, durability, and corrosion resistance. 7. How should the curved Glover Clamp be sterilized? When supplied as a reusable instrument, it should be cleaned, inspected, and sterilized according to the manufacturer’s validated instructions and the healthcare facility’s approved instrument-processing protocol.