9 3/4″ Wylie J Clamp Jaws 3.2 cm Wide 2.5 cm Deep

The 9 3/4″ Wylie J Clamp Jaws 3.2 cm Wide 2.5 cm Deep is a specialized vascular surgical instrument designed for controlled clamping, temporary vascular occlusion, and manipulation of blood vessels during appropriately indicated vascular and cardiovascular procedures. Its 9 3/4-inch overall length , combined with a J-shaped working configuration and precisely specified jaw dimensions, provides extended reach and specialized access for challenging operative fields. The defining feature of this instrument is its Wylie J clamp configuration . The J-shaped working profile is designed to facilitate a specialized approach to vascular structures where a conventional straight clamp may provide less suitable access. Its curved geometry can allow the working end to be positioned around or alongside anatomical structures while maintaining the handles at a practical orientation. The jaws measure 3.2 cm wide and 2.5 cm deep , providing a defined working area for appropriate vascular applications. These dimensions should be considered when selecting the instrument for a specific procedure, as clamp geometry must correspond to the anatomy, vessel size, and surgical technique. The exact clinical application should always be determined by the operating surgeon. At 9 3/4 inches , the Wylie J Clamp offers extended working reach for procedures involving deeper vascular structures. The longer shaft can allow the surgeon to maintain a comfortable hand position while directing the working end toward the target vessel. This may also provide useful clearance around surrounding tissues, retractors, grafts, and other instruments within a complex surgical field. Vascular clamps such as the Wylie J Clamp may be used for temporary vessel occlusion, vascular manipulation, positioning, or controlled surgical exposure , depending on the procedure. Specialized vascular clamps are commonly incorporated into instrument sets for vascular reconstruction and other procedures requiring precise vessel control. Appropriate instrument selection is essential for maintaining controlled handling of delicate vascular structures. The J-shaped design may also assist with positioning where the vessel’s location or surrounding anatomy requires an angled or curved approach. Smooth mechanical action and appropriate jaw alignment are important for predictable application and release. The clamp should be operated carefully and should not be forcibly twisted, bent, or used outside its intended surgical purpose. Professional reusable vascular clamps are commonly manufactured from surgical-grade stainless steel , selected for mechanical strength, durability, and corrosion resistance when properly maintained. Precision construction helps maintain the specified jaw dimensions and intended working geometry through repeated clinical use. Careful handling is particularly important for preserving the J-shaped working end. After use, the 9 3/4″ Wylie J Clamp should be cleaned promptly according to the manufacturer’s validated instructions and the healthcare facility’s approved instrument-reprocessing protocol. Blood and tissue residue should be thoroughly removed from the jaws, hinge, and accessible surfaces. The instrument should then be rinsed, dried, inspected, and sterilized using a validated process compatible with the instrument. Before reuse, trained personnel should inspect the clamp for jaw alignment, smooth opening and closing, corrosion, surface damage, and deformation of the J-shaped working end . The specified 3.2 cm width and 2.5 cm depth should remain consistent with the intended instrument geometry. Any clamp showing structural damage or impaired mechanical function should be removed from service and evaluated according to institutional procedures. The 9 3/4″ Wylie J Clamp Jaws 3.2 cm Wide 2.5 cm Deep provides extended reach and specialized J-shaped access for controlled vascular handling. It is a valuable addition to professional Wylie vascular clamps, J clamps, vascular surgery instruments, cardiovascular surgical clamps, and specialized vascular instrument sets . Key Features 9 3/4-inch overall length provides extended surgical reach. Wylie J-shaped configuration supports specialized vascular access. 3.2 cm jaw width provides a defined working surface. 2.5 cm jaw depth provides specialized jaw dimensions. Designed for controlled vascular clamping and manipulation. Supports temporary vessel occlusion when clinically indicated. Curved J profile can facilitate positioning around anatomy. Extended shaft provides useful clearance in deeper operative fields. Suitable for selected vascular and cardiovascular procedures. Surgical-grade stainless steel construction supports durability. Requires inspection for jaw alignment and J-profile integrity. Reprocessing should follow validated manufacturer and facility protocols. Product Specifications Specification Details Product Name Wylie J Clamp Instrument Type Vascular / Surgical Clamp Overall Length 9 3/4 inches Jaw Configuration J-Shaped Jaw Width 3.2 cm Jaw Depth 2.5 cm Design Wylie Type Primary Function Vascular clamping and manipulation Applications Vascular, cardiovascular surgery Working Reach Extended Material Surgical-grade stainless steel Reusable Yes, when supplied as a reusable instrument Sterilization Follow manufacturer-validated instructions Intended Users Trained surgical professionals FAQs 1. What is the 9 3/4″ Wylie J Clamp used for? It is designed for controlled clamping, temporary occlusion, manipulation, and positioning of blood vessels during appropriately selected vascular and cardiovascular procedures. 2. What are the jaw dimensions of this Wylie J Clamp? The jaws measure 3.2 cm wide and 2.5 cm deep , as specified for this instrument. 3. What does the J-shaped design provide? The J-shaped configuration provides a curved working approach that can facilitate positioning around vascular structures and adjacent anatomy. 4. How long is the Wylie J Clamp? The overall length is 9 3/4 inches , providing extended reach for deeper or restricted operative fields. 5. Is this Wylie clamp suitable for vascular surgery? Yes. It is specialized vascular instrumentation intended for appropriately selected procedures requiring controlled vessel manipulation or temporary occlusion. 6. What material is the Wylie J Clamp made from? Professional reusable vascular clamps of this type are commonly manufactured from surgical-grade stainless steel for strength, durability, and corrosion resistance. 7. How should the Wylie J Clamp be sterilized? When supplied as a reusable instrument, it should be cleaned, inspected, and sterilized according to the manufacturer’s validated instructions and the healthcare facility’s approved instrument-processing protocol.