9″ Renal Artery Clamp 3″ Jaw

The 9″ Renal Artery Clamp 3″ Jaw is a specialized vascular surgical instrument designed for controlled temporary occlusion, positioning, and manipulation of the renal artery during appropriately indicated renal, vascular, and urologic procedures. Its 9-inch overall length provides extended reach, while the 3-inch jaw offers a defined working configuration for accessing and controlling vascular structures within deeper operative fields. Renal artery surgery requires specialized instruments that allow surgeons to obtain controlled vascular access while maintaining appropriate handling of surrounding anatomical structures. A dedicated renal artery clamp can assist with temporary occlusion when blood-flow control is required as part of a surgical technique. The exact indication and method of use should always be determined by the operating surgeon based on patient anatomy and procedural requirements. The 3-inch jaw is an important dimensional feature of this instrument. Its extended working length provides a substantial area for engaging appropriately selected vascular structures. Jaw dimensions should always be considered alongside vessel size, anatomy, and surgical approach to ensure that the selected instrument is appropriate for the intended procedure. The 9-inch overall length provides useful reach when working within deeper abdominal or retroperitoneal operative fields. The elongated profile can allow the surgeon to position the working end around the renal artery while maintaining a practical hand position away from the immediate surgical site. It may also provide useful clearance around surrounding tissues, retractors, grafts, and other instruments. Depending on the procedure, a renal artery clamp may be incorporated into renal vascular reconstruction, renal surgery, vascular repair, transplant-related procedures, and selected urologic operations . It can support temporary vessel occlusion, controlled manipulation, and positioning when appropriate. The instrument should be selected according to the specific surgical technique and anatomical requirements rather than used as a general-purpose clamp. Controlled mechanical action is essential for reliable vascular instrumentation. The jaws should open and close smoothly and maintain appropriate alignment throughout the operating range. Correct positioning is particularly important when working around delicate vascular structures. The clamp should not be forcibly bent, twisted, or used outside its intended surgical purpose. Professional reusable renal artery clamps are commonly manufactured from surgical-grade stainless steel , selected for mechanical strength, durability, and resistance to corrosion when properly maintained. Precision construction helps preserve the intended jaw geometry and mechanical performance through repeated clinical use. Proper handling and inspection are important for maintaining reliable operation. After use, the 9″ Renal Artery Clamp should be cleaned promptly according to the manufacturer’s validated instructions and the healthcare facility’s approved instrument-reprocessing protocol. Blood and tissue residue should be thoroughly removed from the jaws, hinge, and accessible surfaces. The instrument should then be rinsed, dried, inspected, and sterilized using a validated process compatible with the instrument. Before reuse, trained personnel should inspect the clamp for jaw alignment, smooth opening and closing, corrosion, surface damage, and structural integrity . Particular attention should be given to the 3-inch working jaw to ensure that it remains properly aligned and free from deformation. Any instrument showing excessive wear or impaired mechanical function should be removed from service and evaluated according to institutional procedures. The 9″ Renal Artery Clamp 3″ Jaw combines extended reach with a substantial 3-inch working jaw for controlled renal vascular handling. It is a practical addition to professional renal artery clamps, vascular surgery instruments, urologic surgical instruments, renal surgical clamps, and specialized vascular instrument sets . Key Features 9-inch overall length provides extended surgical reach. 3-inch jaw offers a substantial working configuration. Designed specifically for renal artery clamping applications. Supports controlled temporary vascular occlusion. Facilitates renal vessel manipulation and positioning. Extended shaft provides useful access to deeper operative fields. Provides practical clearance around surrounding anatomy. Suitable for selected renal, vascular, and urologic procedures. Surgical-grade stainless steel construction supports durability. Designed for controlled mechanical operation and precise handling. Requires inspection of jaw alignment and working surfaces before use. Reprocessing should follow validated manufacturer and facility protocols. Product Specifications Specification Details Product Name Renal Artery Clamp Instrument Type Renal / Vascular Clamp Overall Length 9 inches Jaw Length 3 inches Primary Application Renal artery clamping Primary Function Vascular occlusion and manipulation Applications Renal, vascular, urologic surgery Working Reach Extended Material Surgical-grade stainless steel Reusable Yes, when supplied as a reusable instrument Sterilization Follow manufacturer-validated instructions Intended Users Trained surgical professionals FAQs 1. What is the 9″ Renal Artery Clamp used for? It is designed for controlled temporary occlusion, positioning, and manipulation of the renal artery during appropriately selected renal, vascular, and urologic procedures. 2. What is the jaw length of this renal artery clamp? The specified jaw length is 3 inches , providing an extended working area for appropriate vascular applications. 3. How long is the Renal Artery Clamp? The overall instrument length is 9 inches , providing useful reach for deeper abdominal and retroperitoneal surgical fields. 4. Why is an extended renal artery clamp useful? Its longer profile can facilitate access to renal vessels located deeper within the operative field while maintaining practical hand positioning. 5. Can this clamp be used in urologic surgery? It may be appropriate for selected renal and urologic procedures requiring controlled renal vessel manipulation or temporary occlusion, according to the surgeon’s technique. 6. What material is the Renal Artery Clamp made from? Professional reusable vascular clamps of this type are commonly manufactured from surgical-grade stainless steel for strength, durability, and corrosion resistance. 7. How should the Renal Artery Clamp be sterilized? When supplied as a reusable instrument, it should be cleaned, inspected, and sterilized according to the manufacturer’s validated instructions and the healthcare facility’s approved instrument-processing protocol.