Artery Clamp .4 1.0mm pair

The Artery Clamp .4 1.0mm pair is a specialized microvascular surgical instrument designed for precise handling, positioning, and controlled temporary occlusion of small blood vessels. With a specified working range of 0.4–1.0mm and a paired configuration, this instrument set is intended for delicate microsurgical procedures where accurate manipulation of very small vascular structures is essential. Small-vessel surgery requires highly specialized instruments that can provide controlled access and reliable mechanical performance within a confined operative field. The Artery Clamp is designed to assist qualified surgical professionals with temporary control of appropriately sized vessels during selected vascular and microsurgical procedures. Its compact working profile allows it to be incorporated into specialized microvascular instrument sets where conventional larger clamps would not be appropriate. The 0.4–1.0mm range is an important characteristic of this artery clamp pair. Vessel diameter varies according to anatomical location, patient anatomy, and surgical procedure, so the appropriate instrument must be selected carefully. The surgeon should confirm that the clamp is suitable for the target vessel and intended surgical technique before use. Microvascular artery clamps can be used in selected procedures requiring temporary vascular control, vessel isolation, positioning, or manipulation. They may form part of surgical workflows involving small-vessel repair, reconstruction, replantation, or microsurgical anastomosis. The precise application, duration, and method of use should always be determined by the operating surgeon according to established clinical practice. The paired configuration provides two clamps, allowing surgical teams to have matching instruments available during procedures where more than one vessel may require controlled manipulation or where sequential vessel control is necessary. The pair format can also simplify organization within specialized microsurgical instrument trays. Because the instrument is intended for very small vessels, precise mechanical operation is essential. The working ends should maintain appropriate alignment and provide controlled movement during placement. The clamps should be operated carefully and without excessive force to avoid inappropriate handling of delicate vascular tissue. Professional microvascular artery clamps are commonly manufactured from surgical-grade stainless steel or other suitable precision surgical materials. Stainless steel is widely used in reusable surgical instruments because it provides strength, durability, and corrosion resistance. The specific material composition and finish should be confirmed against the manufacturer’s product specifications. The Artery Clamp 0.4–1.0mm Pair can be incorporated into microsurgery sets, vascular surgery trays, reconstructive surgery instrument collections, and specialized small-vessel surgical systems. It can complement other microvascular instruments, including approximators, fine forceps, microsurgical needle holders, vascular dilators, and specialized scissors. Proper cleaning and maintenance are especially important for fine microvascular instruments. Following use, each clamp should be cleaned promptly according to the manufacturer’s validated cleaning procedure. The delicate working ends should receive careful attention to prevent biological material from remaining on precision surfaces. Abrasive cleaning materials or improper mechanical handling should be avoided when they may damage the working components. After cleaning, the clamps should be thoroughly rinsed and dried. Each instrument should then be inspected for proper alignment, smooth movement, structural integrity, corrosion, and any signs of deformation or damage. Any clamp that does not function correctly should be removed from clinical service and evaluated by qualified personnel. Sterilization should be performed according to the manufacturer’s validated instructions and the healthcare facility’s approved sterilization protocol. Proper cleaning before sterilization is essential for effective instrument processing. After sterilization, the pair should be stored carefully to protect the fine working ends from impact, bending, contamination, and excessive moisture. The Artery Clamp 0.4–1.0mm Pair provides surgical teams with a specialized solution for controlled small-vessel manipulation. Its fine working range, paired configuration, and precision-oriented design make it a practical addition to professional microsurgical and vascular instrument collections. Key Features Supplied as a pair of microvascular artery clamps Designed for vessels in the 0.4–1.0mm range Suitable for delicate small-vessel surgical applications Designed for controlled temporary vascular occlusion Supports precise vessel positioning and manipulation Suitable for selected microsurgical procedures Useful for small-vessel repair and anastomotic techniques Compact working profile for restricted operative fields Precision-oriented design for delicate vascular handling Suitable for specialized microsurgery instrument sets Designed for careful cleaning and sterilization Requires appropriate handling to protect fine working ends Product Specifications Specification Details Product Name Artery Clamp Instrument Type Microvascular Artery Clamp Configuration Pair Working Range 0.4–1.0mm Quantity 2 Pieces Primary Function Small-vessel control and temporary occlusion Surgical Specialty Microsurgery, Vascular Surgery Application Delicate vascular procedures Instrument Category Microvascular Surgical Instrument Construction Precision surgical instrument material Reusable Subject to manufacturer specifications Sterilization According to validated sterilization protocols Intended Use Professional surgical applications FAQs 1. What is the Artery Clamp 0.4–1.0mm Pair used for? It is designed for controlled handling, positioning, and temporary occlusion of appropriately sized small blood vessels during selected microsurgical and vascular procedures. 2. What vessel size is this artery clamp designed for? The specified working range is 0.4–1.0mm, making it intended for very small-caliber vascular structures. 3. How many artery clamps are included? This product is supplied as a pair, providing two microvascular artery clamps. 4. Is this artery clamp suitable for microsurgery? Yes. Its fine 0.4–1.0mm working range makes it suitable for selected microvascular and microsurgical applications requiring precise vessel control. 5. What is the purpose of a microvascular artery clamp? A microvascular artery clamp can provide temporary control, positioning, or occlusion of an appropriate small blood vessel during selected surgical techniques. 6. Why is the 0.4–1.0mm size important? The specified range helps surgical teams select an instrument appropriate for very small vessels. Proper sizing should be determined according to vessel anatomy and the surgical procedure. 7. What material is used for this artery clamp? Precision microvascular clamps are commonly manufactured from surgical-grade stainless steel or other suitable surgical materials. Exact material specifications should be confirmed with the manufacturer or supplier.