Cooley Tangential Occlusion Clamp 10mm Depth 3.4cm Width

The Cooley Tangential Occlusion Clamp 10mm Depth 3.4cm Width is a specialized vascular occlusion clamp designed for controlled tangential clamping of suitable vascular structures during appropriate cardiovascular and vascular surgical procedures. Its specified 10mm depth and 3.4cm width provide a defined working configuration for surgical teams requiring precise positioning and controlled temporary vascular occlusion. Tangential occlusion clamps are specialized instruments used when temporary control of a selected portion of an appropriate blood vessel is required. This configuration allows the surgical professional to engage a portion of the vessel according to the intended surgical technique. The specific vessel, clamp placement, applied pressure, and duration of application should always be determined by the operating surgeon based on patient anatomy and established clinical protocols. The 10mm working depth is an important dimensional specification of this Cooley clamp. It provides surgical teams with a clear reference when selecting among different tangential occlusion clamp configurations. Correct dimensional selection can help ensure that the instrument is appropriate for the intended operative field and vascular anatomy. The 3.4cm working width further defines the clamp’s configuration. Maintaining vascular clamps in different widths and depths allows surgical teams to select an appropriate instrument according to the vessel characteristics and requirements of the procedure. These dimensions should always be considered together with the target anatomy and the surgeon’s preferred technique. The Cooley Tangential Occlusion Clamp can be incorporated into cardiovascular surgical instrument sets, vascular surgery trays, cardiac surgery collections, vascular reconstruction sets, and specialized tangential occlusion clamp systems . It can complement vascular forceps, vascular scissors, vessel dilators, needle holders, bulldog clamps, aneurysm clamps, and other cardiovascular surgical instruments. Controlled application is essential when working with vascular tissue. Excessive pressure, inappropriate positioning, or prolonged application can potentially cause vascular or surrounding tissue injury. This instrument should therefore be used only on suitable anatomical structures by trained surgical professionals following established surgical techniques. The defined 10mm depth and 3.4cm width provide a specialized option for operating rooms that maintain multiple vascular clamp sizes. A range of configurations can support appropriate instrument selection for different operative approaches and anatomical requirements. Before each procedure, the clamp should be carefully inspected for proper alignment, smooth mechanical operation, structural integrity, and condition of the working surfaces. The occluding components should remain correctly aligned and free from deformation, excessive wear, corrosion, or visible damage. For reusable configurations, the instrument should be cleaned and decontaminated promptly following each procedure according to validated healthcare-facility instrument-processing procedures. Particular attention should be given to the working surfaces, hinge, and other mechanical areas where biological material may accumulate. Following cleaning, the clamp should be inspected again for proper mechanical function and structural condition. Sterilization should be performed using a validated method compatible with the instrument and consistent with applicable manufacturer instructions and institutional protocols. Proper cleaning, sterilization, handling, and storage help maintain instrument integrity and service life. For hospitals, cardiovascular surgeons, vascular surgeons, cardiac surgical teams, operating rooms, surgical centers, and medical instrument suppliers, the Cooley Tangential Occlusion Clamp 10mm Depth, 3.4cm Width provides a specialized option for controlled tangential vascular occlusion. Its defined 10mm depth and 3.4cm width make it a practical addition to professional cardiovascular and vascular surgical instrument collections. Key Features Cooley Tangential Occlusion Clamp design 10mm specified working depth 3.4cm specified working width Designed for controlled tangential vascular occlusion Suitable for appropriate cardiovascular procedures Suitable for selected vascular surgical applications Supports controlled positioning of suitable vascular structures Defined dimensions for accurate instrument selection Suitable for cardiovascular and vascular instrument sets Designed for precise professional surgical handling Manual surgical instrument configuration Requires proper cleaning, inspection, sterilization, and storage Product Specifications Specification Details Product Name Cooley Tangential Occlusion Clamp Instrument Type Tangential Vascular Occlusion Clamp Working Depth 10mm Working Width 3.4cm Primary Application Cardiovascular Surgery Secondary Application Vascular Surgery Intended Use Controlled Tangential Vascular Occlusion Design Tangential Occlusion Operation Manual Construction Surgical Instrument Sterilization According to validated facility protocol and manufacturer guidance Intended Users Trained Surgical Professionals Clinical Environment Hospitals, Operating Rooms & Surgical Centers FAQs 1. What is a Cooley Tangential Occlusion Clamp used for? A Cooley Tangential Occlusion Clamp is designed for controlled temporary tangential occlusion of suitable vascular structures during selected cardiovascular and vascular procedures. 2. What is the depth of this Cooley Tangential Clamp? This model has a specified 10mm working depth . 3. What is the width of this Cooley Occlusion Clamp? The specified working width is 3.4cm . 4. What does tangential occlusion mean? Tangential occlusion refers to controlled clamping of a selected portion of an appropriate vascular structure rather than completely encircling the vessel. 5. Is this clamp suitable for cardiovascular surgery? It is designed for appropriate cardiovascular and vascular surgical applications requiring controlled tangential vascular occlusion, subject to professional surgical judgment. 6. How should the Cooley Tangential Occlusion Clamp be sterilized? For reusable configurations, it should be cleaned, decontaminated, inspected, and sterilized using a validated process consistent with manufacturer guidance and healthcare-facility protocols. 7. How should this vascular occlusion clamp be maintained? The working surfaces, hinge, alignment, and overall structure should be inspected after cleaning and before reuse for proper mechanical function, deformation, wear, or visible damage.