Potts Coarctation Clamp Spoon Shaped Jaw Cardiovascular & Thoracic 203mm

The Potts Coarctation Clamp Spoon Shaped Jaw Cardiovascular & Thoracic 203mm is a specialized cardiovascular and thoracic surgical instrument designed for controlled clamping and manipulation of vascular structures. Its dedicated coarctation clamp configuration and spoon-shaped jaws provide surgeons with a practical solution for accessing and temporarily controlling vessels during complex cardiovascular and thoracic procedures. With an overall length of approximately 203mm , this Potts clamp provides a useful combination of operative reach and maneuverability. The extended profile allows the working jaws to be positioned within deeper surgical fields while keeping the handles accessible to the operating surgeon. This can be particularly valuable during procedures involving major vessels and anatomically confined areas of the thoracic cavity. A defining characteristic of this instrument is its spoon-shaped jaw design . The broader, contoured jaw profile is intended to provide controlled contact with vascular tissue and facilitate appropriate positioning around the target vessel. The shape can help distribute clamping pressure over the contact area rather than concentrating force at a narrow point, although the actual degree of tissue compression depends on instrument positioning and surgical technique. The Potts Coarctation Clamp may be used in selected cardiovascular, vascular, and thoracic surgical procedures where temporary vascular occlusion or controlled vessel manipulation is required. Such instruments are commonly associated with procedures involving vascular reconstruction, vessel repair, anastomosis, and other operations where temporary control of blood flow is necessary. The clamp’s mechanical design allows the surgeon to open and close the jaws with controlled hand pressure and secure the selected position using the locking mechanism. This helps maintain consistent vascular control during a procedure while allowing the surgical team to work around the operative site. Proper positioning is essential, particularly when working with delicate vessels or anatomically important structures. For professional surgical use, the instrument is typically constructed from surgical-grade stainless steel . This material provides the strength needed for controlled clamping while offering resistance to corrosion under appropriate cleaning, maintenance, and sterilization conditions. Precision manufacturing also supports consistent jaw alignment and reliable mechanical function. The 203mm Potts Coarctation Clamp can be incorporated into cardiovascular and thoracic surgical instrument sets , particularly those intended for vascular procedures. Its specialized jaw geometry makes it distinct from general-purpose hemostatic clamps and standard tissue forceps, providing a design specifically suited to controlled vascular manipulation. Ergonomic ring handles facilitate controlled operation and allow the surgeon to adjust the clamp according to the requirements of the procedure. The ratchet or locking mechanism is intended to hold the jaws in the selected position without requiring continuous manual pressure. Surgical personnel should use the instrument only for its intended application and according to established clinical technique. As a reusable surgical instrument, appropriate reprocessing is essential. After use, the clamp should be cleaned promptly to remove blood and biological material, with particular attention given to the jaws, hinge, and locking mechanism. The instrument should be rinsed, dried, inspected for proper alignment and function, and sterilized using a validated method suitable for surgical stainless steel. Manufacturer instructions and institutional infection-control protocols should always be followed. Routine inspection should include checking the spoon-shaped jaws for deformation, chips, surface damage, or misalignment. The hinge and locking mechanism should also be checked for smooth operation. Any instrument exhibiting significant wear, corrosion, or mechanical defects should be removed from service and assessed by qualified instrument maintenance personnel. Overall, the Potts Coarctation Clamp 203mm with Spoon-Shaped Jaw provides a specialized solution for controlled vascular manipulation in cardiovascular and thoracic surgery. Its extended length, contoured jaw profile, durable stainless steel construction, and controlled locking mechanism make it a useful addition to professional vascular surgical instrument sets. Key Features Specialized Potts coarctation clamp for vascular procedures 203mm overall length for useful operative reach Spoon-shaped jaw design for controlled vascular contact Suitable for cardiovascular and thoracic surgery Designed for temporary vascular occlusion and manipulation Contoured jaws support precise positioning around vessels Locking mechanism helps maintain the selected clamping position Ring handles provide controlled manual operation Surgical-grade stainless steel construction Durable and corrosion-resistant with proper maintenance Suitable for reusable professional surgical instrumentation Designed for validated cleaning and sterilization processes Product Specifications Specification Details Product Name Potts Coarctation Clamp Instrument Type Cardiovascular & Thoracic Vascular Clamp Overall Length 203mm Jaw Shape Spoon-Shaped Primary Function Vascular Clamping & Manipulation Surgical Specialty Cardiovascular & Thoracic Surgery Application Temporary Vascular Occlusion Handle Type Ring Handle Locking Mechanism Ratchet / Locking Mechanism Material Surgical-Grade Stainless Steel Reusable Yes, with appropriate reprocessing Sterilization Validated surgical instrument sterilization methods Intended Users Qualified Surgical Professionals FAQs 1. What is a Potts Coarctation Clamp used for? A Potts Coarctation Clamp is a specialized vascular surgical instrument used for controlled manipulation and temporary occlusion of blood vessels during selected cardiovascular and thoracic procedures. 2. What is the length of this Potts Coarctation Clamp? This model has an overall length of approximately 203mm , providing useful reach and maneuverability for cardiovascular and thoracic operative fields. 3. What is the purpose of the spoon-shaped jaw? The spoon-shaped jaw provides a broader, contoured contact profile intended to facilitate controlled positioning and handling of vascular structures. 4. Is the Potts Coarctation Clamp suitable for cardiovascular surgery? Yes. It is designed for professional cardiovascular, vascular, and thoracic surgical applications requiring controlled vessel manipulation or temporary occlusion. 5. What material is this vascular clamp made from? The Potts Coarctation Clamp is specified as being manufactured from surgical-grade stainless steel , supporting strength, durability, and corrosion resistance. 6. Is this Potts clamp reusable? Yes. It is intended for reusable surgical use when appropriate cleaning, inspection, maintenance, and validated sterilization procedures are followed. 7. How should the Potts Coarctation Clamp be sterilized? The instrument should be thoroughly cleaned and inspected before sterilization using a validated process compatible with the instrument and in accordance with manufacturer and institutional protocols.