S Artery Clamp 0.6 1.5mm Pair

The S Artery Clamp 0.6 1.5mm Pair is a specialized microvascular surgical instrument designed for precise handling, positioning, and controlled occlusion of small blood vessels. Supplied as a pair, these artery clamps are intended for delicate surgical applications where accurate manipulation of vessels measuring approximately 0.6 to 1.5mm may be required. Their compact working profile makes them particularly relevant to microsurgery and other procedures involving fine vascular structures. Small-vessel surgery requires specialized instrumentation capable of providing controlled access without unnecessary interference with the surrounding operative field. The S Artery Clamp configuration is designed to give the surgeon a practical instrument for manipulating appropriately sized vessels during selected vascular and microsurgical procedures. The paired format provides two matching instruments, which can be useful when simultaneous or sequential control of multiple vascular structures is required according to the surgical technique. The 0.6–1.5mm specification identifies the intended small-vessel working range associated with this model. Selecting the correct clamp size is important because vascular anatomy varies considerably between procedures. The appropriate instrument should always be chosen by a qualified surgeon based on vessel diameter, tissue characteristics, surgical approach, and the intended clinical application. Artery clamps are commonly incorporated into specialized vascular and microsurgical instrument sets where temporary vessel control is necessary. Depending on the procedure, an appropriate micro artery clamp may assist with vessel isolation, positioning, temporary occlusion, anastomotic work, or other delicate vascular techniques. The clamp should be used only according to established surgical practice and manufacturer recommendations. The compact design supports precise handling in restricted operative fields. Fine vascular procedures often require instruments that can be positioned accurately without occupying excessive space around the surgical site. A dedicated small artery clamp can help provide controlled mechanical interaction with the target vessel while allowing the surgical team to maintain visibility and access. Professional microvascular instruments are generally manufactured from surgical-grade stainless steel or another suitable surgical instrument material. Stainless steel offers useful strength, durability, and corrosion resistance for reusable surgical instrumentation. The exact construction and finish should be verified against the manufacturer’s specifications for the supplied product. Reliable mechanical operation is important for microvascular clamps. The instrument should open and close smoothly, maintain appropriate alignment, and provide consistent performance during handling. Because these instruments are intended for delicate anatomical structures, they should be operated with appropriate surgical technique and without excessive force. The S Artery Clamp 0.6–1.5mm Pair can be included in microsurgery instrument sets, vascular surgery trays, reconstructive surgery collections, and specialized small-vessel surgical inventories. Supplying the clamps as a pair can simplify instrument organization and provide complementary instruments for procedures requiring controlled manipulation of more than one vessel or sequential vascular steps. Proper cleaning and sterilization are essential for maintaining reusable microvascular instruments. Following use, each clamp should be cleaned promptly according to the manufacturer’s validated cleaning procedure. Particular attention should be given to the delicate working ends and moving components. Abrasive cleaning methods or inappropriate handling should be avoided if they could damage the precision surfaces. After cleaning, the instruments should be thoroughly rinsed and dried before inspection. Each clamp should be checked for working-end alignment, smooth movement, structural integrity, corrosion, and any signs of damage. Instruments that do not meet required performance standards should be removed from clinical service. Sterilization should be performed according to the manufacturer’s validated instructions and the healthcare facility’s approved sterilization protocol. Proper cleaning before sterilization is essential for effective reprocessing. Once sterilized, the clamps should be stored carefully to protect the delicate working ends from impact, bending, contamination, or other mechanical damage. The S Artery Clamp 0.6–1.5mm Pair provides a specialized solution for professional surgical teams requiring fine vascular instrumentation. With its small-vessel working range, paired configuration, and precision-oriented design, it is a practical addition to microsurgical and vascular instrument collections where controlled handling of delicate arteries is required. Key Features Supplied as a pair of S artery clamps Designed for small-vessel surgical applications 0.6–1.5mm specified working range Suitable for microvascular and microsurgical procedures Designed for controlled vessel handling and temporary occlusion Compact profile for delicate operative fields Useful for specialized vascular instrument sets Supports precise manipulation of appropriately sized vessels Durable surgical instrument construction Designed for careful cleaning and sterilization Suitable for professional operating-room use Precision-oriented configuration for delicate vascular procedures Product Specifications Specification Details Product Name S Artery Clamp Instrument Type Microvascular Artery Clamp Configuration Pair Working Range 0.6–1.5mm Primary Function Small-vessel handling and controlled occlusion Surgical Specialty Microsurgery, Vascular Surgery Application Delicate vascular procedures Construction Surgical instrument-grade material Quantity 2 Pieces Instrument Category Microvascular Surgical Instrument Reusable Subject to manufacturer specifications Sterilization According to validated sterilization protocols Intended Use Professional surgical applications FAQs 1. What is the S Artery Clamp 0.6–1.5mm Pair used for? It is designed for controlled handling and temporary occlusion of appropriately sized small blood vessels during selected microsurgical and vascular procedures. 2. What vessel size is this artery clamp designed for? The specified working range is 0.6–1.5mm, making it suitable for selected small-vessel and microvascular surgical applications. 3. How many clamps are included? This product is supplied as a pair, providing two S artery clamps. 4. Is this clamp suitable for microsurgery? Yes. Its small-vessel working range and compact configuration make it suitable for selected microsurgical and microvascular applications. 5. What is the purpose of an artery clamp in vascular surgery? An artery clamp can provide temporary control, positioning, or occlusion of an appropriate blood vessel during procedures requiring controlled vascular manipulation. 6. What material is the S Artery Clamp made from? Professional microvascular clamps are generally manufactured from suitable surgical instrument materials such as surgical-grade stainless steel. Product-specific material should be confirmed with the manufacturer or supplier. 7. Can these artery clamps be sterilized? If supplied as reusable instruments, they should be cleaned and sterilized according to the manufacturer’s validated instructions and the healthcare facility’s approved reprocessing protocol.