8 1/2” Rasp Fine Grit 1/2

The 8 1/2″ Rasp Fine Grit 1/2 is a precision surgical instrument designed for controlled bone smoothing and contouring during orthopedic, reconstructive, and related surgical procedures. Its fine-grit configuration is suited to applications where gradual material removal and careful refinement of a bone surface are preferred over a more aggressive rasping action. With an overall length of 8 1/2 inches, the instrument provides a practical balance between working reach and manual control. The size allows the surgeon to position the rasp comfortably while maintaining controlled contact with the intended working area. The Fine Grit 1/2 configuration provides a relatively smooth rasping action that can be useful during finishing stages, contour refinement, and preparation of bone surfaces according to the requirements of the procedure. The rasping surface is designed to assist with controlled abrasion of bone. Rather than relying on a cutting edge, the textured working area gradually refines the contacted surface through repeated controlled strokes. This makes the instrument useful when precise contouring and surface smoothing are required as part of a surgical technique. The 1/2 configuration identifies the specific working pattern or surface arrangement of this rasp and can help surgical teams distinguish it from other rasp sizes and grit configurations within an instrument set. It can therefore be incorporated into orthopedic and surgical instrument trays where multiple levels of rasping action may be required. The 8 1/2″ Rasp Fine Grit 1/2 is designed for straightforward manual handling. Its elongated profile offers useful access while allowing the user to maintain control over the direction and pressure of the rasping movement. This can support gradual refinement of bone contours and preparation of surfaces where controlled finishing is important. For facilities using reusable surgical instruments, proper cleaning and inspection after each procedure are essential. Any remaining tissue or biological material should be removed according to the facility’s validated instrument-processing procedure. The instrument should be inspected for cleanliness, surface condition, and functional integrity before sterilization and reuse. When supplied as a reusable instrument, sterilization should be performed according to the manufacturer’s validated instructions and the healthcare facility’s established sterilization protocol. The 8 1/2″ Rasp Fine Grit 1/2 is a practical addition to orthopedic and general surgical instrument collections where controlled bone smoothing, contouring, and surface refinement are required. Its fine-grit working configuration makes it particularly suitable for applications requiring a more gradual and precise rasping action. Key Features Overall length: 8 1/2 inches Fine-grit surgical bone rasp 1/2 working configuration Designed for controlled bone smoothing Suitable for bone contouring and surface refinement Provides gradual rasping action Useful for finishing and preparation procedures Elongated design supports manual control Suitable for orthopedic and reconstructive applications Can be included in surgical instrument sets and trays Reusable when supplied in a reusable configuration Cleaning, inspection, and sterilization should follow validated instructions Product Specifications Specification Details Product Name 8 1/2″ Rasp Fine Grit 1/2 Instrument Type Surgical Bone Rasp Overall Length 8 1/2 inches Grit Fine Configuration 1/2 Primary Function Bone smoothing and contouring Working Action Controlled rasping Application Bone surface refinement Instrument Design Hand-operated surgical instrument Reusable Depending on supplied configuration Sterilization According to validated manufacturer instructions Intended Use Professional surgical use FAQs 1. What is an 8 1/2″ Rasp Fine Grit 1/2 used for? It is designed for controlled smoothing, contouring, and refinement of bone surfaces during surgical procedures. 2. What does “Fine Grit” mean? Fine grit refers to the texture of the working surface and generally provides a more gradual rasping action for controlled surface refinement. 3. What does the 1/2 designation indicate? The 1/2 designation identifies the specific configuration of the rasp and distinguishes it from other rasp patterns or sizes. 4. What is the overall length of this surgical rasp? The overall length is 8 1/2 inches. 5. Can this rasp be used for orthopedic procedures? Yes. Its design is suitable for bone smoothing and contouring applications commonly associated with orthopedic and reconstructive procedures. 6. Is the 8 1/2″ Rasp Fine Grit 1/2 reusable? It may be reusable when supplied as a reusable surgical instrument. Cleaning, inspection, and sterilization should always follow the manufacturer’s validated instructions. 7. How should the instrument be sterilized? If supplied as reusable, it should be cleaned and sterilized according to the manufacturer’s validated processing instructions and the healthcare facility’s sterilization protocol. 8. What is the advantage of a fine-grit surgical rasp? A fine-grit rasp allows more controlled surface refinement and gradual smoothing when a less aggressive rasping action is preferred.