8½” Rasp Coarse Grit 5/6

The 8½″ Rasp Coarse Grit 5/6 is a specialized surgical instrument designed for controlled bone shaping, reduction, contouring, and surface preparation. Its coarse grit configuration is intended for applications where efficient removal of bone material is required before finer finishing or refinement. With an overall length of 8½ inches, this rasp provides a practical working profile that balances reach with controlled handling. The length allows the surgeon to maintain deliberate instrument movement while working on appropriate bone surfaces. Its coarse working surface is designed to engage the bone effectively during controlled rasping strokes. The 5/6 designation identifies the specific configuration of this rasp and distinguishes it from other available rasp patterns. Choosing the appropriate rasp configuration can help surgical professionals match the instrument to the required degree of bone preparation and the specific needs of the procedure. The coarse grit surface is particularly useful for more substantial bone shaping and initial contouring. It can assist with controlled reduction of irregular areas and preparation of the bone surface before additional refinement. The instrument should be used according to the surgeon’s established technique and the requirements of the specific surgical procedure. The 8½-inch format offers a useful combination of working reach and maneuverability. Its hand-held construction allows the surgeon to regulate pressure and stroke direction while maintaining control over the working surface. This makes it a practical addition to orthopedic, reconstructive, and other appropriate surgical instrument sets. When supplied as a reusable instrument, the rasp should be cleaned promptly after use according to validated instrument-reprocessing procedures. Special attention should be given to the coarse grit surface because tissue and surgical debris may become lodged within the working pattern. Appropriate cleaning helps maintain the functional condition of the rasp. Following cleaning, the instrument should be inspected for wear, damage, corrosion, or changes to the working surface. Sterilization should be performed according to the manufacturer’s validated instructions and the healthcare facility’s established infection-control protocol. Proper handling, cleaning, sterilization, and storage can help preserve the working surface and extend the useful service life of the instrument. The 8½″ Rasp Coarse Grit 5/6 provides a practical option for surgical professionals requiring a coarse rasp for controlled bone reduction, shaping, and contouring in appropriate clinical applications. Key Features 8½-inch overall length Coarse grit working surface 5/6 configuration Designed for controlled bone reduction Suitable for bone shaping and contouring Supports efficient material removal Useful for initial bone surface preparation Provides controlled hand-held operation Suitable for appropriate orthopedic applications Practical for specialized surgical instrument sets Reusable when supplied as a reusable instrument Requires appropriate cleaning and sterilization Product Specifications Specification Details Product Name Coarse Grit 5/6 Surgical Rasp Overall Length 8½ inches Instrument Type Surgical Bone Rasp Grit Coarse Configuration 5/6 Primary Function Bone Reduction & Contouring Working Action Controlled Rasping Application Bone Shaping & Surface Preparation Reusable Depending on supplied configuration Sterilization Follow validated manufacturer instructions Intended Use Professional surgical use FAQs 1. What is the 8½″ Coarse Grit 5/6 Rasp used for? It is designed for controlled bone reduction, shaping, contouring, and surface preparation during appropriate surgical procedures. 2. What does “Coarse Grit” mean? Coarse grit refers to the working surface configuration intended for more efficient removal of bone material compared with finer rasp patterns. 3. What does 5/6 refer to? 5/6 identifies the specific working configuration or pattern of this surgical rasp. 4. What is the overall length of this rasp? The overall length specified for this instrument is 8½ inches. 5. Can this rasp be used in orthopedic surgery? It may be incorporated into appropriate orthopedic and reconstructive procedures where controlled bone shaping or reduction is required. 6. Is the 8½″ rasp reusable? It may be supplied as a reusable surgical instrument. Reusable versions should be cleaned, inspected, and sterilized according to validated manufacturer instructions. 7. How should the coarse working surface be cleaned? The working surface should be thoroughly cleaned to remove tissue and surgical debris according to the facility’s validated instrument-reprocessing procedure. 8. When is a coarse rasp useful? A coarse rasp is useful when more efficient bone material removal and initial contouring are required before finer surface finishing.