9″ Lamb TC Rasp No. 7

The 9″ Lamb TC Rasp No. 7 is designed for professional surgical applications where controlled bone contouring, shaping, and smoothing are required. The instrument combines a practical 9-inch length with a No. 7 rasp configuration, providing surgeons with useful working access and controlled handling during procedures involving bone refinement. The “TC” designation indicates a tungsten carbide working surface, which is designed to provide a durable abrasive cutting profile for controlled bone work. The rasp can be used to refine irregular bone surfaces and assist with gradual contouring according to the surgeon’s preferred technique and the requirements of the procedure. Its 9-inch overall length provides useful reach while maintaining practical instrument control. This makes the Lamb TC Rasp suitable for use in surgical environments where access to the working area and controlled manipulation are important. The design can be incorporated into orthopedic, maxillofacial, reconstructive, and other appropriate surgical instrument sets. The No. 7 configuration identifies the specific rasp size or pattern and allows surgical professionals to select the appropriate instrument for the desired working application. As with other bone rasps, the amount and direction of pressure applied should be determined by the surgeon based on the anatomical site and surgical objective. The tungsten carbide working surface is intended to provide consistent abrasion during appropriate use. Its durable construction can support repeated professional handling when the instrument is properly cleaned, inspected, sterilized, and maintained. The working surface should be protected from unnecessary contact with other metal instruments during handling and storage. When supplied as a reusable instrument, the Lamb TC Rasp should be thoroughly cleaned after each procedure using validated methods appropriate for the instrument. Particular attention should be given to the working surface to remove residual biological material. The instrument should be inspected for wear, damage, or changes to the rasp surface before sterilization and reuse. Sterilization should always be carried out according to the manufacturer’s validated instructions and the healthcare facility’s established infection-control procedures. Appropriate handling and storage help protect the tungsten carbide working surface and maintain the instrument’s functional condition. The 9″ Lamb TC Rasp No. 7 offers a practical combination of extended reach, specialized rasp configuration, and tungsten carbide working characteristics. It is a useful addition to professional surgical instrument collections where controlled bone shaping and surface refinement are required. Key Features 9-inch overall instrument length Lamb TC surgical rasp design No. 7 rasp configuration Tungsten carbide working surface Designed for controlled bone contouring Suitable for bone shaping and surface smoothing Provides practical surgical reach Supports controlled instrument manipulation Suitable for orthopedic and maxillofacial applications Designed for professional surgical environments Reusable when supplied as a reusable instrument Requires appropriate cleaning and sterilization procedures Product Specifications Specification Details Product Name Lamb TC Rasp Overall Length 9 inches Rasp Number No. 7 Working Surface Tungsten Carbide (TC) Instrument Type Surgical Bone Rasp Application Bone Contouring & Smoothing Suitable Specialties Orthopedic, Maxillofacial & Related Surgery Reusable Depending on supplied configuration Sterilization Follow validated manufacturer instructions Intended Use Professional surgical use FAQs 1. What is the 9″ Lamb TC Rasp No. 7 used for? It is designed for controlled bone contouring, shaping, and smoothing during appropriate surgical procedures. 2. What does “TC” mean on this rasp? “TC” refers to tungsten carbide, indicating a tungsten carbide working surface designed for durable abrasive bone refinement. 3. What does No. 7 refer to? No. 7 identifies the specific rasp configuration or size within the Lamb TC Rasp range. 4. What is the overall length of this rasp? The instrument has an overall length of 9 inches. 5. Can this rasp be used for bone smoothing? Yes. It is designed to support controlled bone surface refinement and smoothing according to the surgeon’s technique. 6. Is the Lamb TC Rasp reusable? It may be supplied as a reusable surgical instrument. Reprocessing should follow the manufacturer’s validated cleaning and sterilization instructions. 7. How should the tungsten carbide surface be maintained? The working surface should be carefully cleaned and inspected after use and protected from unnecessary impact or contact with other instruments during storage. 8. How should this rasp be sterilized? When supplied as reusable, it should be sterilized according to validated manufacturer instructions and the healthcare facility’s established sterilization protocol.