OR Grade Kerrison Rongeur 6mm 90° 7″ Down Bite, Surgical Spine Instrument

The OR Grade Kerrison Rongeur 6mm 90° 7″ Down Bite Surgical Spine Instrument is designed for professional use in spinal, orthopedic, and neurosurgical procedures requiring controlled removal of small portions of bone or tissue. The Kerrison-style rongeur is widely used when precise bone trimming and decompression are required around the spinal structures. This model features a 90° down-biting configuration , allowing the working jaws to approach the target area in a controlled downward direction. The angled profile can be useful when working within confined surgical spaces where direct access with a straight instrument may be difficult. The 6mm bite size provides a defined working area for controlled removal, while the 7-inch length offers useful reach into the operative field without requiring an excessively long instrument. This combination makes the rongeur suitable for various spinal procedures where access, visibility, and controlled bone removal are important. Kerrison rongeurs may be used during procedures such as spinal decompression, laminectomy, laminotomy, and other orthopedic or neurosurgical procedures where removal or trimming of bone is required. The instrument should be used according to the surgeon’s preferred technique and the specific clinical requirements of the procedure. The instrument is typically manufactured from surgical-grade stainless steel , providing a durable construction suitable for repeated professional use when properly maintained. The robust design supports routine handling in demanding operating-room environments, while the smooth surface facilitates cleaning and inspection. The OR Grade Kerrison Rongeur 6mm 90° Down Bite is a practical addition to spinal surgery instrument sets, neurosurgical trays, orthopedic instrument collections, and operating-room equipment. Its specialized jaw orientation and compact bite size provide surgeons with a focused option for controlled bone removal. For reusable applications, the instrument should be thoroughly cleaned after use, with particular attention to the jaw and internal mechanism. It should then be inspected, dried, lubricated where appropriate, and sterilized using validated procedures consistent with the instrument manufacturer’s instructions and healthcare-facility protocols. Key Features OR Grade Kerrison-style spinal rongeur 6mm bite size 90° down-biting jaw configuration 7-inch overall length Designed for controlled bone removal Suitable for spinal decompression procedures Useful for laminectomy and laminotomy procedures Angled profile supports access to confined surgical areas Surgical-grade stainless steel construction Durable design for repeated professional use Suitable for orthopedic and neurosurgical instrument sets Reusable when properly cleaned and sterilized Product Specifications Specification Details Product Name Kerrison Rongeur Instrument Type Bone Rongeur Bite Size 6mm Jaw Angle 90° Bite Direction Down Bite Length 7 inches Specialty Spine, Orthopedic & Neurosurgery Primary Application Controlled Bone Removal Material Surgical-Grade Stainless Steel Reusable Yes, when appropriately processed Sterilization Compatible with validated sterilization procedures Intended Use Professional Surgical Use Common Applications Spinal surgery Spinal decompression Laminectomy Laminotomy Bone removal Orthopedic surgery Neurosurgery Vertebral bone trimming Spinal canal decompression procedures Frequently Asked Questions 1. What is a Kerrison Rongeur used for? A Kerrison Rongeur is designed for controlled removal and trimming of small portions of bone or tissue during spinal, orthopedic, and neurosurgical procedures. 2. What does 6mm mean on this Kerrison Rongeur? The 6mm specification refers to the bite size or working width of the rongeur’s jaws. 3. What does 90° down bite mean? A 90° down-biting configuration means the working jaws are oriented at approximately 90 degrees to the shaft, with the biting action directed downward toward the surgical field. 4. How long is this Kerrison Rongeur? This model has a 7-inch length , providing useful reach and maneuverability during spinal procedures. 5. Is this Kerrison rongeur suitable for spinal surgery? Yes. It is designed specifically for spinal and neurosurgical applications involving controlled bone removal and decompression. 6. What material is the instrument made from? It is typically manufactured from surgical-grade stainless steel for durability and repeated professional use. 7. Can the Kerrison Rongeur be sterilized? Yes. As a reusable surgical instrument, it should be thoroughly cleaned, inspected, dried, and sterilized according to validated procedures appropriate for the instrument and healthcare facility.